Sale!

Festo 1501331 Safety Module, CAMC-G-S3, Advanced Drive Safety

Original price was: USD 185.90.Current price is: USD 160.16.

CMMP-AS-…-M3 plug-in safety module with STO, SS1, SS2, SOS, SLS, SSR, SSM and SBC functions, SafetyTool configuration and 24 V DC logic supply.

SKU Festo-1501331 Category
Festo Accessories for Servo Drives

Festo CAMC-G-S3 Safety Module

BrandFesto
Model IdentifierCAMC-G-S3
Official Part Number1501331

Technical Overview

The Festo CAMC-G-S3 is a plug-in safety module for CMMP-AS-...-M3 motor controllers, extending the drive with STO, SS1, SS2, SOS, SLS, SSR, SSM and SBC functions. It uses nominal 24 V DC logic power and SafetyTool parameterisation, with ten digital logic inputs and three safe two-channel semiconductor outputs. Configurable input/output behavior and test pulses support the documented safety-control interfaces, while green, yellow and red LEDs indicate operating condition. Festo lists use in safety-related control systems up to SIL 3 and PL e, with category ratings differing by function. The 220 g module has IP20 protection when mounted and a 0–40 °C ambient range.

CMMP-AS-...-M3 plug-in module providing advanced drive safety functions, configurable safe I/O and SafetyTool parameterisation.

Key Features

  • Plug-in safety module for CMMP-AS-...-M3 motor controllers
  • STO, SS1, SS2 and SOS drive-stop functions
  • SLS, SSR and SSM speed-related safety functions
  • SBC safe brake-control function
  • Ten digital logic inputs with configurable safe-input behavior and test pulses
  • Three safe two-channel semiconductor outputs plus potential-free signal contact
  • Nominal 24 V DC logic supply with ±20% permissible range
  • SafetyTool parameterisation and 2 ms minimum cycle time
  • Manufacturer-listed use up to SIL 3 and PL e; function-specific categories retained in specification table
  • 220 g product weight, IP20 when mounted and 0–40 °C ambient range

Integrate monitored drive-stop, speed and brake-control functions into a compatible CMMP-AS-...-M3 controller through one configurable safety module.

Technical Specification Matrix

ParameterValue
Nominal voltage for logic power supply DC24 V
Nominal operating voltage DC24 V
Nominal current logic power supply0.15 A
Permissible range for logic voltage±20%
Current consumption of logic power supply without clamping brake0.2 A
Short circuit current ratingYes, with one exception: Contact C1/C2
Current rating at 40° C0.2 A
Fuse protection (short circuit)No
Digital output designPotential-free signal contact; 3 safe, 2-channel semiconductor outputs
Number of digital logic inputs10
Digital outputs, switching logicSemiconductor outputs: parameterisable PNP (positive switching) 2-; channel equivalent/antivalent
LED display, product-specificError (red); Normal operation (green); Safe state (yellow)
Safety functionSafe brake control (SBC); Safe Speed Range (SSR); Safe Speed Monitor (SSM); Safe torque off (STO); Safely limited speed (SLS); Safe Operating Stop (SOS); Safe Stop 1 (SS1); Safe Stop 2 (SS2)
Probability of Failure per Hour (PFH)9.5E-09
Proof test interval20 y
Hardware fault tolerance1
SFF Safe Failure Fraction99.5 %
Certified for safety function to ISO 13849 and IEC 61508 (SIL)Product can be used in SRP/CS up to SIL 3 (high demand)
Safety Integrity Level (SIL)Safe stop 2 (SS2)/SIL 3; Safe stop 1 (SS1)/SIL 3; Safe brake control (SBC)/SIL 3; Safely limited speed (SLS)/SIL 3; Safe operating stop (SOS)/SIL 3; Safe speed monitor (SSM)/SIL 3; Safe Speed Range (SSR)/SIL 3; Safe torque off (STO)/SIL 3
Performance Level (PL)Safe brake control (SBC)/category 4, Performance Level e; Safely limited speed (SLS)/category 3, performance level e; Safe operating stop (SOS)/category 3, performance level e; Safe stop 1 (SS1)/category 3, Performance Level e; Safe stop 2 (SS2)/category 3, Performance Level e; Safe speed monitor (SSM)/category 3, Performance Level e; Safe speed range (SSR)/category 3, Performance Level e; Safe Torque Off (STO)/category 4, performance level e
Diagnostic coverage97.5 %
Certified for safety functions to ISO 13849 (PL)Product can be used in SRP/CS up to category 4, PL e
ApprovalGerman Technical Control Board (TÜV)
CE mark (see declaration of conformity)To EU EMC Directive; To EC Machinery Directive; In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK instructions for EMC; To UK regulations for machines; To UK RoHS instructions
Certificate issuing authorityTÜV Rheinland 01/205/5165.03/24
LABS (PWIS) conformityVDMA24364 zone III
Storage temperature-25 °C...55 °C
Relative air humidity5 - 90%; Non-condensing
Degree of protectionIP20; In mounted state
Ambient temperature0 °C...40 °C
Physical Weight (kg)0.22
Type of mountingPlug-in module for CMMP-AS...-M3
Note on materialsRoHS compliant
Mounting positionAny
Wire endsWire ferrule
Connection cross section0.25 mm²...0.5 mm²
Electrical connectionScrew terminal; Straight plug
DisplayGreen/yellow/red LED
Operator controlsDIL switch
Specification logic inputIEC 61131-2, type 3
Features of logic input4 safe, 2-channel inputs Equivalent/antivalent switching Test pulses; configurable Function configurable; 6 safe, 1-channel inputs Test pulses configurable
Working range of logic input13 V...28.8 V
Max. nominal input current0.015 A
Debounce time for inputs0.3 ms
Current rating per output50 mA
Max. current digital logic outputs50 mA
Fuse capacity of outputsShort-circuit and cross-circuit monitoring
Min. cycle time2 ms
ParameterisationVia SafetyTool
Dimensions L x W x H (cm)9.91 x 11.22 x 2.87

Industrial Applications

1. Monitored Deceleration before Torque Removal

A machine axis requires a controlled stopping sequence before its drive output stage is disabled. The module provides Safe Stop 1 and Safe Torque Off functions for the compatible CMMP-AS controller. Festo's manual describes SS1 monitoring the speed during braking and then requesting the torque-off function, with the configured stop response coordinated with the complete axis and load.

Problem Solved

SS1 and STO combine monitored deceleration with subsequent torque removal, providing documented drive-level functions for implementing the selected stopping sequence within the machine safety design.

SS1 STO CMMP-AS-...-M3

2. Monitoring a Reduced-Speed Operating Mode

A machine's selected operating mode needs the drive speed to remain within a configured limit. The module includes Safely Limited Speed and related speed-monitoring functions, with SafetyTool parameterisation and configurable safe inputs. The manufacturer describes SLS monitoring against a selected speed boundary, allowing the application to use a drive-level monitoring function rather than rely only on an ordinary speed command.

Problem Solved

SLS supplies monitoring of the configured speed limit, adding a documented safety function to the operating mode beyond the controller's normal commanded speed value.

SLS SafetyTool Configurable safe inputs

3. Drive-Integrated Control of a Suitable Holding Brake

An axis includes a suitable holding brake or clamping unit that engages when de-energised. The module's Safe Brake Control function supplies the documented drive-level brake-control function, which can be coordinated with the selected stop sequence. Brake engagement time and load dynamics remain material to the application, particularly for suspended loads, and the module's function is assessed together with the actual brake and drive assembly.

Problem Solved

SBC provides a documented safety-related brake-control function within the drive system, supporting coordinated brake requests alongside the configured stopping sequence and external brake hardware.

SBC De-energise-to-engage brake Drive-integrated control
Select your currency