Sale!

Festo 15038 Cartridge Cylinder, 10 mm Bore, 15 mm Stroke

Original price was: USD 46.54.Current price is: USD 40.82.

Single-acting pushing cylinder with M5 port, spring return, threaded mounting and 42 N theoretical advance force at 6 bar, without cushioning.

SKU Festo-15038 Category
Festo Piston Rod Cylinders

Festo EGZ-10-15 Cartridge Cylinder

BrandFesto
Model IdentifierEGZ-10-15
Official Part Number15038

Technical Overview

The Festo EGZ-10-15 is a single-acting cartridge cylinder with a 10 mm piston diameter and 15 mm pushing stroke. Its pneumatic advance produces 42 N theoretical force at 6 bar, while the manufacturer catalogue specifies a spring return with 3 N return force for this bore and stroke. An M5 port supplies the 2–8 bar operating range, and the threaded housing mounts directly or through lock nuts in any position. The unit has no cushioning and no position detection. Nickel-plated brass housing, a POM cover and high-alloy steel rod provide the mechanical construction, with −20 to 80 °C ambient limits.

10 mm bore, 15 mm stroke single-acting cartridge cylinder with spring return, M5 connection and 42 N theoretical advance force at 6 bar.

Key Features

  • 10 mm piston diameter and 15 mm pushing stroke
  • Single-acting pneumatic advance with spring return
  • 42 N theoretical advance force at 6 bar
  • 3 N spring return force for 10 mm bore/15 mm stroke
  • M5 pneumatic port and M4 male piston-rod thread
  • M16x1.5 cylinder mounting thread with lock-nut installation
  • No cushioning and no position detection
  • 2–8 bar operating range and any mounting position
  • Nickel-plated brass housing, POM cover and high-alloy steel piston rod
  • −20 to 80 °C ambient range and CRC 2 corrosion resistance

Provide a 15 mm pneumatic pushing stroke with spring return in a threaded cartridge cylinder producing 42 N theoretical advance force at 6 bar.

Technical Specification Matrix

ParameterValue
Stroke15 mm
Piston diameter10 mm
CushioningNo cushioning
Mounting positionAny
Mode of operationPushing; Single-acting
DesignPiston; Piston rod; Cylinder barrel
Position detectionNone
VariantsPiston rod at one end
Operating pressure2 bar...8 bar
Operating mediumCompressed air to ISO 8573-1:2010 [7:-:-]
Note on operating and pilot mediumEster oil < 0.1mg/m³, according to ISO 8573-1:2010 [-:-:2]
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B2-L
Ambient temperature-20 °C...80 °C
tightening torque of drive mounting20 Nm
Theoretical force at 0.6 MPa (6 bar, 87 psi)42 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke42 N
Type of mountingEither:; With male thread; Via lock nut
Pneumatic connectionM5
Material coverPOM
Material sealsTPE-U(PU)
Material housingBrass; nickel-plated
Material piston rodHigh-alloy steel
Spring return force3 N
Piston-rod end threadMale M4
Cylinder mounting threadM16x1.5

Industrial Applications

1. Ejecting a Small Released Component

A fixture needs to push a small released part clear of a nest using a short linear movement. This cartridge cylinder supplies 15 mm of pneumatic advance with 42 N theoretical force at 6 bar. The spring returns the rod after the working air is exhausted, while the M5 pneumatic connection supplies the single-acting circuit.

Problem Solved

A pneumatic pushing stroke and mechanical spring return provide the eject-and-reset action in one small cylinder, with documented travel and force for evaluating the component-release task.

15 mm stroke 42 N at 6 bar Spring return

2. Extending a Retractable Fixture Locator

A small fixture locator must project into its working position and then withdraw to clear the loading area. The single-acting pushing cylinder supplies the extension movement, with spring return for withdrawal. Its M16x1.5 threaded housing and lock-nut mounting allow direct installation in the fixture structure, while the 15 mm stroke defines the available movement for the locator arrangement.

Problem Solved

Threaded cartridge mounting places the actuator directly in the fixture, providing a retractable locating movement with pneumatic extension and spring-driven withdrawal after the air command ends.

Threaded cartridge mounting Single-acting Spring return

3. Pneumatic Actuation of a Light Mechanical Plunger

A compact mechanism uses a short push to actuate a light mechanical plunger or lever. The cylinder's M4 rod thread provides the attachment interface, and its 10 mm piston supplies a documented 42 N theoretical advance force at 6 bar. The spring-return action resets the actuator after the pneumatic command, with no integrated cushioning or position detection assigned to the mechanism.

Problem Solved

The cartridge actuator converts an air command into a short mechanical push, allowing a light plunger mechanism to use a compact threaded drive with automatic spring return.

M4 rod thread 10 mm piston 42 N theoretical force
Select your currency