Sale!

Festo 9857 Solenoid Valve Body, 3/2 NC, G1/2, Separate F Coil

Original price was: USD 158.34.Current price is: USD 136.50.

Piloted poppet-seat valve body with 3700 l/min nominal flow, spring reset, detenting manual override and 1.5–8 bar range; F coil ordered separately.

SKU Festo-9857 Category
Festo Solenoid Valves

Festo MFH-3-1/2 Solenoid Valve Body

BrandFesto
Model IdentifierMFH-3-1/2
Official Part Number9857

Technical Overview

The Festo MFH-3-1/2 is a piloted 3/2-way normally closed valve body with a poppet-seat design and mechanical spring reset. G1/2 ports provide a 3700 l/min standard nominal flow rating over a 1.5–8 bar operating range. The F solenoid coil is ordered separately, so its voltage and power are determined by that selected coil rather than this valve-body number. A detenting manual override supports local actuation, and exhaust flow can be throttled. The 1100 g die-cast aluminium body uses NBR seals, with an M5 pilot-exhaust port and manifold-rail or through-hole mounting. Specified component switching times are 18 ms on and 90 ms off.

G1/2 piloted 3/2 normally closed valve body with 3700 l/min nominal flow, spring reset and separately ordered F coil.

Key Features

  • 3/2-way normally closed poppet-seat function
  • Piloted operation with mechanical spring reset
  • G1/2 connections at ports 1, 2 and 3
  • 3700 l/min standard nominal flow to DIN 1343
  • F solenoid coil and its electrical connection ordered separately
  • 1.5–8 bar operating range; non-reversible flow direction
  • 18 ms switch-on and 90 ms switch-off times
  • Detenting manual override and throttleable exhaust
  • M5 pilot-exhaust port 82; manifold-rail or through-hole mounting
  • 1100 g product weight with die-cast aluminium housing and NBR seals

Switch and exhaust a G1/2 pneumatic branch with a normally closed valve body rated for 3700 l/min, using a separately selected F coil.

Technical Specification Matrix

ParameterValue
Valve function3/2-way, single solenoid, closed
Type of actuationElectrical
Construction width52 mm
Standard nominal flow rate (standardised to DIN 1343)3700 l/min
pneumatic working portG1/2
Operating voltageVia solenoid coil, must be ordered separately
Operating pressure0.15 MPa...0.8 MPa; 1.5 bar...8 bar
DesignPoppet seat
Type of resetMechanical spring
Approvalc UL us - Recognised (Oil)
Degree of protectionIP65
Nominal size14 mm
Mounting grid pitch69 mm
Exhaust-air functionCan be throttled
Sealing principleSoft
Mounting positionAny
Manual overrideDetenting
Type of pilotingPiloted
Flow directionNon-reversible
lapUnderlap
b value0.3
Switching time off90 ms
Switching time on18 ms
Max. positive test pulse with 0 signal2200 µs
Max. negative test pulse with 1 signal3700 µs
Characteristic coil dataSee solenoid coil, to be ordered separately
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Corrosion resistance class CRC1 - Low corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Storage temperature-20 °C...60 °C
Media temperature-10 °C...60 °C
Ambient temperature-5 °C...40 °C
Physical Weight (kg)1.1
Electrical connectionVia F coil, to be ordered separately
Type of mountingEither:; On manifold rail; With through-hole
Pilot exhaust port 82M5
Pneumatic connection, port 1G1/2
Pneumatic connection, port 2G1/2
Pneumatic connection, port 3G1/2
Note on materialsRoHS compliant
Material sealsNBR
Material housingDie-cast aluminium

Industrial Applications

1. Control of a Single-Acting Fixture Cylinder

A fixture uses a single-acting cylinder that needs its working line fed and exhausted under an electrical sequence. The valve's 3/2 normally closed function supplies the required directional states, with mechanical spring reset returning the valve after actuation. G1/2 connections and 3700 l/min nominal flow define the pneumatic interface, while a separately ordered F coil supplies the selected electrical actuation configuration.

Problem Solved

The three-port function combines cylinder feed and exhaust routing, providing an electrically actuated single-acting circuit through a valve body with documented flow and spring-return behavior.

3/2 normally closed Spring reset G1/2 ports

2. Commanded Air Delivery to a Nozzle Bank

A process station turns a bank of air nozzles on during a selected work interval. The valve provides 3700 l/min standard nominal flow through G1/2 connections, with a 3/2 normally closed routing function and separately selected F coil. Its 18 ms switch-on and 90 ms switch-off ratings characterize the valve component, while the nozzle and tubing arrangement determine the actual air-delivery transient.

Problem Solved

The valve provides a common command point for the nozzle-bank air feed, with documented flow and switching characteristics for developing the station's pneumatic sequence.

3700 l/min nominal 18 ms on / 90 ms off Separate F coil

3. Switching a Common Fixture Supply Branch

A machine section feeds several downstream pneumatic functions from a common branch and needs one supply/exhaust valve at that branch. This 3/2 body provides G1/2 supply, working and exhaust connections, with exhaust that can be throttled in the surrounding circuit. Manifold-rail or through-hole mounting locates the 1100 g body, while the detenting override offers documented local valve actuation during setup.

Problem Solved

One three-port valve combines common-branch feed and exhaust selection, providing a defined pneumatic switching point with mounting options and a local manual override.

Common branch switching Throttleable exhaust Detenting override
Select your currency