Sale!

Festo 8116755 Parallel Gripper, 2 mm/Jaw, 43 N Closing

Original price was: USD 162.76.Current price is: USD 140.40.

Size 10 double-acting parallel gripper with 2 mm stroke per jaw, ball guide, 0.02 mm repetition accuracy, M3 ports and 49 g product weight.

SKU Festo-8116755 Category
Festo Parallel Grippers

Festo DHPC-10-A-S-2 Parallel Gripper

BrandFesto
Model IdentifierDHPC-10-A-S-2
Official Part Number8116755

Technical Overview

The Festo DHPC-10-A-S-2 is a size 10 double-acting parallel gripper with a 2 mm stroke per jaw and ball-guided movement. At 6 bar it provides 43 N total closing force and 51.2 N total opening force; the corresponding per-jaw values are 21.5 N and 25.6 N. Gripper repetition accuracy is 0.02 mm, and the maximum operating frequency is 3 Hz. This side-connected M3 version uses the flat finger-mounting arrangement and supports proximity-switch position detection. Its 49 g anodised aluminium housing assembly has high-alloy stainless steel jaws, with 2–8 bar operation, −10 to 60 °C ambient conditions and no gripping-force backup.

Double-acting parallel gripper with 2 mm stroke per jaw, ball guide, 43 N total closing force at 6 bar and 0.02 mm repetition accuracy.

Key Features

  • Size 10 two-jaw parallel gripper with 2 mm stroke per jaw
  • Double-acting pneumatic operation with no force backup
  • Ball guide and flat gripper-finger mounting
  • 43 N total closing force at 6 bar; 21.5 N per jaw
  • 51.2 N total opening force at 6 bar; 25.6 N per jaw
  • 0.02 mm repetition accuracy and 0.2 mm maximum replacement accuracy
  • 3 Hz maximum operating frequency; 12 ms minimum opening and 14 ms minimum closing times at 6 bar
  • 25 g maximum mass per external gripper finger
  • Side M3 pneumatic connections and proximity-switch position detection
  • 49 g product weight with anodised aluminium housing and high-alloy stainless steel jaws

Handle components with 2 mm travel per jaw and ball-guided parallel motion offering 0.02 mm gripper repetition accuracy.

Technical Specification Matrix

ParameterValue
Size10
Stroke per gripper jaws2 mm
Max. replacement accuracy0.2 mm
Max. angular gripper jaw backlash ax, ay0 deg
Max. gripper jaw backlash Sz0 mm
Rotationally symmetrical0.2 mm
Repetition accuracy, gripper0.02 mm
Number of gripper jaws2
Drive systemPneumatic
Mounting positionAny
Mode of operationDouble-acting
Gripper functionParallel
Gripper force back-upNone
DesignConnection direction on the side; Flat mounting method for gripper fingers; Lever; Force pilot operated motion sequence
GuideBall guide
Position detectionVia proximity switch
VariantsMetals with copper, zinc or nickel by mass as main constituent are; excluded from use. Exceptions are nickel in steel, chemically nickel-; plated surfaces, printed circuit boards, cables, electrical plug connectors; and coils.
Operating pressure0.2 MPa...0.8 MPa; 2 bar...8 bar; 29 psi...116 psi
Max. operating frequency of gripper3 Hz
Min. opening time at 0.6 MPa (6 bar, 87 psi)12 ms
Min. closing time at 0.6 MPa (6 bar, 87 psi)14 ms
Max. mass per external gripper finger25 g
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Corrosion resistance class CRC0 - No corrosion stress
LABS (PWIS) conformityVDMA24364-B2-L
Suitability for the production of Li-ion batteriesSuitable for battery production with reduced Cu/Zn/Ni values (F1a)
Ambient temperature-10 °C...60 °C
Total gripping force, opening, 0.6MPa (6bar, 87 psi)51.2 N
Total gripping force, closing, 0.6MPa (6bar, 87 psi)43 N
Gripper force per gripper jaw, opening, 0.6 MPa (6 bar, 87 psi)25.6 N
Gripper force per gripper jaw, closing, 0.6 MPa (6 bar, 87 psi)21.5 N
Mass moment of inertia0.04 kgcm²
Max. force on gripper jaw Fz static33 N
Max. torque at gripper Mx static0.28 Nm
Max. torque at gripper My static0.18 Nm
Max. torque at gripper Mz static0.28 Nm
Physical Weight (kg)0.049
Type of mountingEither:; Direct mounting via through-hole; Direct mounting via thread; Via through-hole and dowel pin; Via female thread and dowel pin
Pneumatic connectionM3
Note on materialsRoHS compliant
Material housingAnodised aluminium
Material gripper jawsHigh-alloy stainless steel

Industrial Applications

1. External Pickup of Small Components

A pick-and-place station needs opposing fingers to approach a component from its outer faces and close for transfer. The two parallel jaws provide 2 mm travel each, and pneumatic closing delivers a stated total force of 43 N at 6 bar before application-specific finger effects are considered. The 49 g gripper assembly provides a documented mass for the moving tooling design.

Problem Solved

Opposing parallel movement supports external contact on the component, while the documented travel and closing-force data provide concrete mechanical parameters for the transfer tooling.

2 mm per jaw 43 N total closing at 6 bar 49 g

2. Internal Handling of a Hollow Part

A transfer tool can grip a hollow component from its inner contour when its external surface must remain accessible. Double-acting jaw movement provides powered opening for an internal contact arrangement, with 51.2 N total opening force specified at 6 bar. Suitable custom fingers transfer that motion to the bore, with the actual contact force governed by pressure and finger geometry.

Problem Solved

Powered parallel opening supports an internal gripping arrangement, leaving the component's outside surface accessible for the subsequent handling or placement task without an external clamping contact.

Internal gripping 51.2 N total opening at 6 bar Double-acting

3. Repeatable Presentation to an Assembly Fixture

An assembly fixture needs a component presented with consistent gripper-jaw movement before the receiving tooling establishes its final location. Ball guidance and 0.02 mm gripper repetition accuracy characterize this gripper's repeated movement. Proximity-switch position detection can provide jaw-state feedback to the machine sequence, while threaded or through-hole mounting with dowel-pin options locates the gripper on its handling head.

Problem Solved

Repeatable guided jaw motion supports consistent component presentation, and compatible position feedback helps coordinate release with the receiving fixture rather than relying only on elapsed time.

Ball guide 0.02 mm repetition Position detection
Select your currency