Sale!

Festo 151163 M5 One-Way Flow Control Valve, 95 l/min Nominal

Original price was: USD 11.44.Current price is: USD 10.66.

M5 exhaust-air one-way flow control with knurled screw, 95 l/min nominal controlled flow, 0.2–10 bar pressure range and 12 g product weight.

SKU Festo-151163 Category
Festo Flow Control Valves

Festo GRLA-M5-RS-B One-Way Flow Control Valve

BrandFesto
Model IdentifierGRLA-M5-RS-B
Official Part Number151163

Technical Overview

The Festo GRLA-M5-RS-B meters pneumatic exhaust air through an adjustable one-way flow control with M5 connections at both ports. A knurled screw sets the restriction, while the screw-in mounting supports installation in any position. Standard nominal flow in the controlled direction is 95 l/min, distinct from the 169 l/min standard-flow figure at 6-to-0 bar. The valve operates over 0.2–10 bar and −10 to 60 °C ambient and media temperatures. Its 12 g assembly has a 2 mm nominal size, NBR seals, a brass adjusting screw and a die-cast zinc swivel fitting, with documented Class 4 cleanroom suitability.

M5 exhaust-air one-way flow control valve with knurled adjustment, 95 l/min standard nominal controlled flow and 12 g product weight.

Key Features

  • Exhaust-air one-way flow control function
  • M5 connections at ports 1 and 2
  • Knurled screw for restriction adjustment
  • 95 l/min standard nominal flow in the controlled direction
  • 169 l/min controlled-direction standard flow at 6→0 bar
  • 0.2–10 bar operating pressure
  • 2 mm nominal size and 1.5 Nm maximum tightening torque
  • Screw-in installation in any mounting position
  • 12 g assembly with NBR seals, brass adjusting screw and die-cast zinc swivel fitting
  • Class 4 cleanroom suitability; −10 to 60 °C ambient/media range

Set local pneumatic exhaust restriction with a knurled screw and M5 interfaces in a 12 g one-way flow control valve.

Technical Specification Matrix

ParameterValue
Valve functionExhaust air one-way flow control function
Pneumatic connection, port 1M5
Pneumatic connection, port 2M5
Adjustment componentKnurled screw
Type of mountingScrew-in
Standard nominal flow rate in flow control direction95 l/min
Standard nominal flow rate in blocked direction76 l/min...95 l/min
Operating pressure0.2 bar...10 bar
Ambient temperature-10 °C...60 °C
Maritime classificationSee certificate
Explosion protectionThe information in the certificate must be observed!; Zone 1 (ATEX); Zone 2 (ATEX); Zone 21 (ATEX); Zone 22 (ATEX)
Mounting positionAny
Controlled-direction standard flow at 6→0 bar169 l/min
Non-return-direction standard flow at 6→0 bar135 l/min...170 l/min
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
LABS (PWIS) conformityVDMA24364-B1/B2-L
Cleanroom suitability, measured according to ISO 14644-14Class 4 according to ISO 14644-1
Media temperature-10 °C...60 °C
Nominal size2 mm
Max. tightening torque1.5 Nm
Physical Weight (kg)0.012
Material screwed plugnickel-plated
Note on materialsRoHS compliant
Material sealsNBR
Material adjusting screwBrass
Material swivel fittingDie-cast zinc

Industrial Applications

1. Metered Travel of a Pneumatic Slide

A pneumatic slide needs a controlled working stroke rather than unrestricted exhaust discharge. Installed in a suitable actuator exhaust path, this valve provides an adjustable restriction through its knurled adjustment screw. The M5 connections fit the corresponding circuit connections, and the documented 95 l/min standard nominal controlled flow characterizes the selected valve size.

Problem Solved

Adjustable exhaust restriction gives the machine builder a local means of setting pneumatic travel behavior, while the knurled screw provides direct manual adjustment.

Exhaust-air metering 95 l/min nominal Knurled screw

2. Directional Speed Setting for a Fixture Actuator

A double-acting fixture actuator can need different movement behavior when engaging and withdrawing. A one-way exhaust flow control provides directional restriction at the selected connection rather than imposing the same restriction on both flow directions. This variant combines manually adjustable exhaust metering with published controlled-direction and blocked-direction nominal flow ratings, supporting a circuit with separately set directional motion.

Problem Solved

The one-way function permits directional pneumatic adjustment, helping a fixture circuit tune the selected exhaust stroke without treating both flow directions as an identical restriction.

One-way function Manual adjustment 0.2–10 bar

3. Compact Local Exhaust Adjustment in a Cleanroom Machine

A cleanroom machine needs local pneumatic exhaust adjustment near a moving mechanism, where fitting mass and installation access matter. The valve weighs 12 g and has documented Class 4 cleanroom suitability under the stated ISO measurement method. Its screw-in design permits any mounting position, with a knurled screw for direct manual restriction adjustment.

Problem Solved

The compact valve places manual exhaust adjustment at the pneumatic connection, combining documented cleanroom suitability with installation orientation flexibility in a lightweight assembly.

Cleanroom Class 4 12 g Screw-in mounting
Select your currency