1. Three-state Command of a Transfer Cylinder
A pneumatic transfer cylinder needs extension and retraction commands with a separate exhausted neutral state between operations. This valve provides two directional working states and a spring-return exhausted centre through an ISO size 2 sub-base. Its 2300 l/min nominal flow and 3–16 bar pilot-pressure range characterize the routing component, while the cylinder and load determine the resulting movement.
Problem Solved
A dedicated exhausted centre gives the pneumatic sequence a neutral routing state alongside extension and retraction, with air-signal actuation through the documented pilot interfaces.
5/3 exhausted centre
Pneumatic actuation
ISO size 2
2. Directional Gripper Control with Exhausted Neutral
A handling fixture uses a suitable double-acting gripper that requires opening, closing and an exhausted valve state after the part is supported. The three-position valve supplies those pneumatic routing commands, while its mechanical springs establish the centre state when actuation is removed. Throttleable exhaust allows the surrounding circuit to include exhaust metering for the commanded gripper movements.
Problem Solved
Three routing states support opening and closing commands plus an exhausted neutral selection, giving the fixture's pneumatic sequence an explicit third state after supported placement.
Spring reset
Throttleable exhaust
Three routing states
3. Forward, Reverse and Exhaust Commands for an Air Motor
A compatible reversible pneumatic motor requires directional air commands and an exhausted neutral command in a winding or positioning mechanism. The valve combines reversible flow with two working directions and an exhausted centre. Its stated 16 ms switch-on and 59 ms switch-off times describe valve behaviour; motor run-down and load response remain properties of the complete pneumatic and mechanical arrangement.
Problem Solved
One pneumatic valve provides forward, reverse and exhausted-neutral routing, allowing the air-control sequence to select the motor circuit's required connection state through a standard sub-base interface.
Reversible flow
Exhausted neutral
2300 l/min nominal