1. Metered Travel of a Pneumatic Slide
A pneumatic slide needs a controlled working stroke rather than unrestricted exhaust discharge. Installed in a suitable actuator exhaust path, this valve provides an adjustable restriction through its knurled adjustment screw. The M5 connections fit the corresponding circuit connections, and the documented 95 l/min standard nominal controlled flow characterizes the selected valve size.
Problem Solved
Adjustable exhaust restriction gives the machine builder a local means of setting pneumatic travel behavior, while the knurled screw provides direct manual adjustment.
Exhaust-air metering
95 l/min nominal
Knurled screw
2. Directional Speed Setting for a Fixture Actuator
A double-acting fixture actuator can need different movement behavior when engaging and withdrawing. A one-way exhaust flow control provides directional restriction at the selected connection rather than imposing the same restriction on both flow directions. This variant combines manually adjustable exhaust metering with published controlled-direction and blocked-direction nominal flow ratings, supporting a circuit with separately set directional motion.
Problem Solved
The one-way function permits directional pneumatic adjustment, helping a fixture circuit tune the selected exhaust stroke without treating both flow directions as an identical restriction.
One-way function
Manual adjustment
0.5–10 bar
3. Panel-accessible Pneumatic Adjustment
A machine operator needs access to a pneumatic restriction during setup without reaching into the internal tube layout. This valve supports front-panel mounting and has a knurled adjustment screw. Its two M5 ports connect the selected branch behind the panel, while the alternative through-hole mounting method accommodates a fixed machine bracket when a panel interface is unnecessary.
Problem Solved
The documented mounting choices place manual flow adjustment at an accessible location, giving the machine a practical interface for setting directional pneumatic restriction during setup.
Front-panel mounting
Knurled screw
M5 ports