Sale!

Festo 8090405 Stopper Cylinder, 50 mm Bore, 30 mm Stroke

Original price was: USD 397.80.Current price is: USD 341.90.

Spring-assisted stopper with 50 mm bore, 30 mm stroke, adjustable front shock absorber, POM roller, G1/8 ports and 1.9 kg product weight.

SKU Festo-8090405 Category
Festo Stopper Cylinder And Feed Separator

Festo DFST-50-30-Y4-A-G2 Stopper Cylinder

BrandFesto
Model IdentifierDFST-50-30-Y4-A-G2
Official Part Number8090405

Technical Overview

The Festo DFST-50-30-Y4-A-G2 is a spring-assisted double-acting stopper cylinder with a 50 mm piston, 30 mm stroke and a POM roller on its toggle lever. An adjustable front shock absorber provides 15 mm cushioning travel for stopping workpiece carriers. This configuration includes a spring and can also be used as a single-acting drive, as documented by Festo. Vertical through-hole mounting and G1/8 connections define the installation, with proximity-switch piston sensing and inductive lever sensing available. The 1.9 kg assembly operates at 2–10 bar and 5–60 °C ambient temperature. Its 3000 N permissible impact figure describes a brief end-position force, rather than a moving-payload rating.

50 mm bore, 30 mm stroke spring-assisted stopper cylinder with adjustable front shock absorber, 15 mm cushioning travel and POM roller.

Key Features

  • 50 mm piston diameter and 30 mm stroke
  • Double-acting mechanism with spring; also usable as a single-acting drive
  • Adjustable front shock absorber with 15 mm cushioning travel
  • POM roller and piston rod with toggle lever
  • 3000 N permissible impact-force rating under the manufacturer's stated condition
  • Piston sensing by proximity switch and lever sensing by inductive sensor
  • Guide rod for torque protection
  • Vertical through-hole mounting and G1/8 pneumatic connections
  • 2–10 bar operating-pressure range
  • 1.9 kg product weight, POM roller and 5–60 °C ambient range

Cushion arriving workpieces with an adjustable shock absorber and reset the stopper using the documented spring-assisted drive configuration.

Technical Specification Matrix

ParameterValue
Stroke30 mm
Piston diameter50 mm
CushioningElastic cushioning rings/plates at both ends; Shock absorber, adjustable, at front
Mounting positionVertical
Mode of operationDouble-acting; Pulling
DesignPiston rod with toggle lever
Position detectionVia proximity switch
Sensing the toggle lever positionFor inductive sensors
Protection against torque/guideGuide rod
Operating pressure0.2 MPa...1 MPa; 2 bar...10 bar
Operating mediumCompressed air to ISO 8573-1:2010 [7:-:-]
Corrosion resistance class CRC1 - Low corrosion stress
LABS (PWIS) conformityVDMA24364 zone III
Ambient temperature5 °C...60 °C
Cushioning length15 mm
Impact force3000 N
Physical Weight (kg)1.9
Type of mountingWith through-hole
Pneumatic connectionG1/8
Note on materialsRoHS compliant
Material coverDie-cast aluminium
Material sealsNBR
Material housingWrought aluminium alloy
Material piston rodHigh-alloy stainless steel
Material rollPOM
Impact-force rating conditionBrief force on the roller with piston rod advanced and toggle lever already in its end position; not a moving-payload rating
Spring-assisted functionDouble-acting with spring; also usable as a single-acting drive

Industrial Applications

1. Cushioned Arrival at a Conveyor Workstation

A conveyor workstation needs to decelerate an arriving workpiece carrier before processing begins. The stopper's toggle lever transfers contact into the adjustable front shock absorber, with 15 mm cushioning travel for this size. Its vertical installation places the roller in the conveying path, while the actual permissible carrier mass depends on the manufacturer's conveying-speed and loading curves.

Problem Solved

The cushioned toggle-lever mechanism absorbs the carrier's arrival through a controlled stopping movement, providing an adjustable alternative to an uncushioned mechanical contact at the workstation.

Adjustable shock absorber 15 mm cushioning Vertical mounting

2. Spring-assisted Reset for Repeated Carrier Stops

A transfer line must raise its stopper again after releasing one carrier so that the next can be intercepted. This exact variant includes a spring in addition to its double-acting pneumatic function. Festo also permits the spring-equipped version to operate as a single-acting drive, providing a documented reset arrangement for a stop-and-release sequence using the 30 mm stroke.

Problem Solved

The spring-assisted configuration provides a mechanical reset action alongside pneumatic operation, returning the stopping mechanism for the next carrier in the repeated stop-and-release sequence.

Spring-assisted 30 mm stroke Single-acting use supported

3. Position-feedback Coordination of Stop and Release

A transfer line needs to coordinate carrier release with the next station and distinguish the cylinder position from the lever's contact state. This stopper supports proximity-switch piston detection and inductive sensing of the toggle lever. Double-acting movement through the 30 mm stroke supplies the commanded stop and release motion, while compatible sensors provide the corresponding machine-sequence inputs.

Problem Solved

Separate sensing provisions expose piston and lever states to the control sequence, helping coordinate release with the actual mechanism state rather than assuming both conditions from a timed command.

Proximity-switch piston sensing Inductive lever sensing 30 mm stroke
Select your currency