Sale!

Festo 8065027 NPN NO T-Slot Sensor, 0.3 m Cable with M8 Plug

Original price was: USD 68.38.Current price is: USD 59.54.

Magneto-resistive T-slot position sensor with NPN NO output, 0.2 mm repeatability, 150 Hz switching, 0.3 m cable with three-pin M8 plug and IP65/IP68.

SKU Festo-8065027 Category
Festo Cylinder Sensors

Festo SMT-8G-NS-24V-E-0,3Q-M8D Magneto-resistive Proximity Sensor

BrandFesto
Model IdentifierSMT-8G-NS-24V-E-0,3Q-M8D
Official Part Number8065027

Technical Overview

The Festo SMT-8G-NS-24V-E-0,3Q-M8D is a magneto-resistive position sensor for compatible pneumatic drives with a T-slot. This version provides an NPN normally open output, 0.2 mm repetition accuracy and a 150 Hz maximum switching frequency. It operates from 10–30 V DC, with a 0.3 m three-core PUR cable terminating in an A-coded M8 plug. The sensor is inserted lengthwise into the slot and clamped, with a lateral cable outlet and yellow switching LED. Its cable supports energy-chain and robot applications under documented test conditions; general ambient operation is −20 to 70 °C, with −5 to 70 °C specified for moving cable.

Magneto-resistive T-slot sensor with NPN normally open output, 0.2 mm repetition accuracy and 0.3 m three-core cable with M8 plug.

Key Features

  • Magneto-resistive position measurement for compatible T-slot drives
  • NPN normally open switching output
  • 0.2 mm repetition accuracy and 150 Hz maximum switching frequency
  • 1 ms switch-on and switch-off times
  • 10–30 V DC operating range; 24 V DC rated voltage
  • 100 mA maximum output current with short-circuit and overload protection
  • 0.3 m PUR cable with three-pin A-coded M8 plug and lateral outlet
  • Cable suitable for energy-chain and robot applications under specified test conditions
  • Lengthwise insertion and clamping in T-slot; 0.8 Nm maximum tightening torque
  • 10 g product weight, yellow switching LED and IP65/IP68 protection

Monitor a compatible T-slot drive with NPN normally open feedback, 0.2 mm repetition accuracy and a short cable with an M8 plug.

Technical Specification Matrix

ParameterValue
DesignFor T-slot
Based on standardEN 60947-5-2
ApprovalRCM; c UL us - Listed (Oil)
CE mark (see declaration of conformity)To EU EMC Directive; In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK instructions for EMC; To UK RoHS instructions
Certificate issuing authorityUL E232949
Note on materialsRoHS compliant
Instructions on usehttps://www.festo.com/Drive-Sensor-Overview
Measured variablePosition
Measuring principleMagneto-resistive
Ambient temperature-20 °C...70 °C
Repetition accuracy0.2 mm
Switching outputNPN
Switching element functionN/O contact
Switch-on time1 ms
Switch-off time1 ms
Max. switching frequency150 Hz
Max. output current100 mA
Max. switching capacity DC2.8 W
Voltage drop2 V
Inductive protective circuitAdapted to MZ, MY, ME coils
Off-state current0.15 mA
Short circuit current ratingYes
Overload protectionYes
Rated operational voltage DC24 V
Operational voltage range DC10 V...30 V
Residual ripple10%
Reverse polarity protectionFor all electrical connections
Electrical connection 1, connection typeCable with plug
Electrical connection 1, connector systemM8x1, A-coded, to EN 61076-2-104
Electrical connection 1, number of connections/cores3
Electrical connection 1, type of mountingScrew-type lock with hexagon A/F 9 mm and longitudinal knurl; Rotatable
Electrical connection 1, compatible type of mountingCompatible with rotatable/non-rotatable screw-type lock
Connection outlet orientationLateral
Material electrical contactGold-plated brass
Material connector housingTPE-U(PU)
Material screw-type lockBrass, nickel-plated
Test conditions cableBending strength: to Festo standard; Test conditions on request; Torsional strength: > 300,000 cycles, ±270°/0.1 m; Energy chain: > 5 million cycles, bending radius 28 mm
Cable length0.3 m
Cable characteristicSuitable for energy chains/robot applications
Cable sheath colourGrey
Material cable sheathTPE-U(PU)
Type of mountingClamped in T-slot; Inserted into the slot lengthwise
Max. tightening torque0.8 Nm
Mounting positionAny
Physical Weight (kg)0.01
Housing colourBlack
Material housingAluminium; Reinforced PA; High-alloy stainless steel
Switching status indicationYellow LED
Ambient temperature with moving cable-5 °C...70 °C
Degree of protectionIP65; IP68
LABS (PWIS) conformityVDMA24364-B2-L
Suitability for the production of Li-ion batteriesSuitable for battery production with reduced Cu/Zn/Ni values (F1a)
Cleanroom suitability, measured according to ISO 14644-14Element installed statically, no meaningful evaluation possible according; to ISO 14644-1

Industrial Applications

1. End-position Feedback for Pneumatic Sequencing

An assembly station needs feedback that a compatible pneumatic drive has reached its selected end position before the control sequence advances. The magneto-resistive sensor mounts in the drive's T-slot and delivers an NPN normally open signal. Its 0.2 mm repetition accuracy characterises repeated switching feedback, while the yellow LED shows the local switching condition during setup and operation.

Problem Solved

Position-dependent switching gives the controller feedback from the moving drive, reducing reliance on a fixed delay when sequencing the next ordinary machine operation.

NPN NO output 0.2 mm repetition accuracy T-slot mounting

2. Position Feedback on a Moving Handling Assembly

A handling assembly carries a compatible pneumatic drive while its sensor wiring moves with the mechanism. This sensor's 0.3 m PUR cable is specified for energy-chain and robot applications, with documented torsional and chain test conditions. The three-pin A-coded M8 plug connects the sensor to the continuation wiring, and the −5 to 70 °C moving-cable range defines the relevant thermal condition.

Problem Solved

The documented moving-cable construction supports position feedback where the wiring must flex with the mechanism, addressing cable routing needs beyond those of a fixed installation.

0.3 m PUR cable Energy-chain capability −5 to 70 °C moving cable

3. Adjustable Intermediate-position Monitoring

A machine needs to observe a selected intermediate position of a compatible magnetic pneumatic drive rather than only its mechanical end stop. Lengthwise insertion and clamping within the T-slot allow the sensor to be positioned at the required switching location. The lateral cable outlet accommodates the documented connection arrangement, while the yellow LED shows the local switching condition.

Problem Solved

Adjustable slot placement positions the switching feedback at the selected process location, and the local yellow indicator makes that switching condition visible during mechanical setup.

Lengthwise insertion T-slot clamping Yellow switching LED
Select your currency