Sale!

Festo 8058466 Flow Sensor, 0.02–1 l/min, IO-Link, 4 mm Ports

Original price was: USD 232.44.Current price is: USD 199.94.

Thermal unidirectional flow sensor with 0.02–1 l/min range, configurable PNP/NPN and analogue outputs, IO-Link, colour LCD and four-pin M8 connector.

SKU Festo-8058466 Category
Festo Flow Sensors

Festo SFAH-1U-Q4S-PNLK-PNVBA-M8 Flow Sensor

BrandFesto
Model IdentifierSFAH-1U-Q4S-PNLK-PNVBA-M8
Official Part Number8058466

Technical Overview

The Festo SFAH-1U-Q4S-PNLK-PNVBA-M8 is a unidirectional thermal flow sensor with a 0.02–1 l/min measuring range. Heat-transfer measurement supports compressed air, nitrogen and argon, with accuracy specified as ±(2% of measured value + 1% full scale). Two switchable PNP/NPN outputs, selectable voltage/current analogue signals and IO-Link V1.1 provide electrical interfaces for monitoring flow and accumulated volume or mass. The illuminated multicolour LCD displays selectable engineering units, while PIN-code and IO-Link protection restrict setting changes. This 60 g sensor has straight 4 mm tubing connections, a four-pin A-coded M8 connector and IP40 protection, operating from 22–26 V DC.

0.02–1 l/min thermal flow sensor with unidirectional measurement, configurable PNP/NPN outputs, analogue signals, IO-Link and 4 mm tubing connections.

Key Features

  • 0.02–1 l/min unidirectional measuring range with heat-transfer principle
  • Compressed air, nitrogen and argon operating media
  • Flow accuracy ±(2% of measured value + 1% full scale)
  • Two selectable PNP or NPN switching outputs with NC/NO configuration
  • Window, threshold and automatic difference-monitoring switching functions
  • Analogue output options: 0–10 V, 1–5 V or 4–20 mA
  • IO-Link V1.1 COM2 with 14-bit measured flow, volume monitoring and 4 ms minimum cycle time
  • 32-bit volume/mass measured value through IO-Link service data
  • Straight 4 mm tubing connections and four-pin A-coded M8 electrical connector
  • 60 g product weight, multicolour illuminated LCD and IP40 protection

Measure low gas flows from 0.02 to 1 l/min and share flow and consumption information through configurable outputs and IO-Link.

Technical Specification Matrix

ParameterValue
ApprovalRCM; c UL us - Listed (Oil)
CE mark (see declaration of conformity)To EU EMC Directive; In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK instructions for EMC; To UK RoHS instructions
Note on materialsRoHS compliant
Measured variableMass flow rate; Volumetric flow rate
Flow directionUnidirectional
Measuring principlethermal
Measurement methodHeat transfer
Start value for flow rate measuring range0.02 l/min
End value for flow rate measuring range1 l/min
Operating pressure-0.9 bar...10 bar
Operating mediumArgon; Compressed air to ISO 8573-1:2010 [6:4:4]; Nitrogen
Media temperature0 °C...50 °C
Ambient temperature0 °C...50 °C
Nominal temperature23 °C
Accuracy of flow rate± (2% o.m.v. + 1% FS)
Repetition accuracy offset in ± %FS0.2 %FS
Repetition accuracy span in ± %FS0.8 %FS
Temperature coefficient span in ± %FS/Ktyp. 0.15%FS/K
Pressure influence range in ± %FSTyp. 1 %FS
Switching output2 x PNP or 2 x NPN, switchable
Switching functionWindow comparator; Threshold value comparator; Auto difference monitoring
Switching element functionNC or NO, switchable
Max. output current100 mA
Analogue output0 - 10 V; 4 - 20 mA; 1 - 5 V
Flow characteristic curve start value0 l/min
Flow characteristic curve end value1 l/min
Max. load resistance current output500 Ohm
Min. load resistance voltage output20 kOhm
Short circuit current ratingYes
Overload protectionAvailable
ProtocolIO-Link®
IO-Link, Protocol versionDevice V 1.1
IO-Link, ProfileSmart sensor profile
IO-Link, Function classesBinary data channel (BDC); Process data variable (PDV); Identification; Diagnostics; Teach channel
IO-Link, communication modeCOM2 (38.4 kBaud)
IO-Link, SIO-Mode supportYes
IO-Link, Port classA
IO-Link, Process data length IN3 bytes
IO-Link, Process data content IN1 bit BDC (volume monitoring); 14 bit PDV (measured flow value); 2 bit BDC (flow monitoring)
IO-Link, Service data IN32-bit volume / mass measured value
IO-Link, Min. cycle time4 ms
IO-Link, Data storage required0.5 KB
Operational voltage range DC22 V...26 V
Reverse polarity protectionFor all electrical connections
Electrical connection 1, connection typePlug
Electrical connection 1, connector systemM8x1, A-coded, to EN 61076-2-104
Electrical connection 1, number of connections/cores4
Electrical connection 1, type of mountingSnap-locking; Screw-type lock; Not rotatable
Electrical connection 1, compatible type of mountingCompatible with latching lock; Compatible with rotatable screw-type lock
Type of mountingWith accessories
Mounting positionAny
Pneumatic connectionFor tubing O.D. 4 mm
Pneumatic connection, outlet directionStraight
Physical Weight (kg)0.06
Material housingReinforced PA
Material in contact with the mediumAnodised wrought aluminium alloy; Epoxy; NBR; Reinforced PA; Silicon; Silicon nitride; High-alloy stainless steel
Display typeIlluminated LCD, multi-colour
Displayable unitsg; g/min; l; l/h; l/min; scft; scft/h
Protection against tamperingIO-Link®; PIN code
Degree of protectionIP40
Pressure drop5 mbar
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B2-L
Cleanroom suitability, measured according to ISO 14644-14Class 4 according to ISO 14644-1

Industrial Applications

1. Low-Flow Gas Feed Monitoring

A process fixture uses a small compressed-air, nitrogen or argon feed and needs to observe whether flow remains within its selected working band. This sensor measures unidirectionally from 0.02 to 1 l/min using thermal heat transfer. Its window-comparator switching function can represent the configured band, while the local LCD and electrical outputs provide measured-flow information at the device and controller.

Problem Solved

Low-range flow measurement and a configurable window comparator provide an electrical indication of the selected gas-feed condition, supporting monitoring of a small process branch.

0.02–1 l/min Window comparator Air/N₂/argon

2. Observation of Unexpected Standby Air Flow

A small pneumatic branch is expected to draw very little air during a machine standby phase. The sensor measures the actual branch flow and supports threshold or automatic difference monitoring, giving the controller an input for observing an unexpected change. Its 0.02–1 l/min measuring range and configurable switching outputs define the available low-flow sensing capability for this arrangement.

Problem Solved

Measured flow and comparator outputs expose an unexpected air draw during standby, providing a branch-level diagnostic input for investigating pneumatic consumption changes.

Threshold comparator Difference monitoring Low-flow measurement

3. Gas Consumption Recording Across Machine Cycles

A production station needs consumption information as well as instantaneous gas flow when comparing operating cycles. The sensor provides measured-flow data through IO-Link and a 32-bit volume or mass measured value through service data. Selectable display units include litres and grams, allowing the connected monitoring system to use the documented flow and accumulated-quantity information from the same instrument.

Problem Solved

Flow and accumulated volume or mass information from one sensor support consumption recording, letting the monitoring system compare gas usage alongside the instantaneous process-flow signal.

IO-Link V1.1 32-bit volume/mass 14-bit flow value
Select your currency