Sale!

Festo 175054 Throttle Valve, M5 to QS-3, 40 l/min

Original price was: USD 23.14.Current price is: USD 20.54.

Slotted-screw flow-control valve with 0–10 bar operating range, 9 g product weight, −10 to 60 °C media/ambient rating and Class 4 cleanroom suitability.

SKU Festo-175054 Category
Festo Flow Control Valves

Festo GRLO-M5-QS-3-LF-C Throttle Valve

BrandFesto
Model IdentifierGRLO-M5-QS-3-LF-C
Official Part Number175054

Technical Overview

The Festo GRLO-M5-QS-3-LF-C is a throttle valve with an M5 pneumatic connection and a QS-3 connection, adjusted using a slotted-head screw. Its flow-control function provides 40 l/min standard nominal flow in the throttled direction, with a separately stated 80 l/min standard-flow figure at 6-to-0 bar conditions. The 9 g valve screws into the pneumatic interface and permits any mounting position across a 0–10 bar operating range. NBR seals, a nickel-plated brass hollow bolt and die-cast zinc swivel fitting form the connection assembly, with −10 to 60 °C media and ambient limits and Class 4 cleanroom suitability.

M5-to-QS-3 throttle valve with slotted-screw adjustment, 40 l/min nominal flow, 0–10 bar operation and 9 g product weight.

Key Features

  • Throttle valve with a flow-control function
  • M5 port 1 and QS-3 port 2 connections
  • Slotted-head screw for flow adjustment
  • 40 l/min standard nominal flow in the flow-control direction
  • 80 l/min standard flow at separately specified 6-to-0 bar conditions
  • 0–10 bar operation over the stated −10 to 60 °C temperature range
  • Screw-in male-thread mounting in any position
  • 1.3 Nm nominal tightening torque with ±20% tolerance
  • NBR seals, nickel-plated brass hollow bolt, brass adjusting screw and POM release ring
  • 9 g product weight, Class 4 cleanroom suitability and VDMA24364-B1/B2-L PWIS conformity

Trim pneumatic flow at an M5-to-QS-3 connection with slotted-screw adjustment and a documented 40 l/min nominal-flow rating.

Technical Specification Matrix

ParameterValue
Valve functionFlow control function
Pneumatic connection, port 1M5
Pneumatic connection, port 2QS-3
Adjustment componentSlotted head screw
Type of mountingScrew-in; With male thread
Standard nominal flow rate in flow control direction40 l/min
Operating pressure0 MPa...1 MPa; 0 bar...10 bar
Ambient temperature-10 °C...60 °C
Mounting positionAny
Operating pressure complete temperature range0 bar...10 bar
Standard flow rate in flow-control direction at 0.6→0 MPa (6→0 bar, 87→0 psi)80 l/min
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
LABS (PWIS) conformityVDMA24364-B1/B2-L
Cleanroom suitability, measured according to ISO 14644-14Class 4 according to ISO 14644-1
Media temperature-10 °C...60 °C
Nominal torque1.3 Nm
Tolerance for nominal tightening torque±20%
Physical Weight (kg)0.009
Note on materialsRoHS compliant
Material sealsNBR
Material hollow boltBrass; nickel-plated
Material release ringPOM
Material adjusting screwBrass
Material swivel fittingDie-cast zinc

Industrial Applications

1. Pneumatic Actuator Flow Adjustment

A compact pneumatic mechanism needs local adjustment of the air flow feeding its actuator circuit. The valve's slotted-head screw changes the throttling setting at the M5-to-QS-3 connection. The 40 l/min standard nominal-flow rating characterises the valve, while actual actuator speed depends on the available pressure, load and surrounding pneumatic connections.

Problem Solved

Adjustable throttling supplies a local means of changing the actuator circuit's air flow, supporting motion tuning through a mechanically set valve at the connection.

Slotted-screw adjustment 40 l/min nominal M5 / QS-3

2. Process Air-Blast Flow Trimming

A tooling station uses a compressed-air jet for a release or clearing step and needs an adjustable flow setting at the branch connection. The throttle valve provides manual flow control through its slotted-head screw over a 0–10 bar operating range. Its 9 g screw-in assembly places that adjustment at the local M5-to-QS-3 interface.

Problem Solved

A local throttling adjustment changes the air delivered to the jet branch, allowing the process flow setting to be tuned without changing the machine's upstream regulated pressure.

0–10 bar Manual flow control 9 g

3. Small Pneumatic Volume Charging

A test fixture charges a small pneumatic volume and needs a restriction that adjusts the rate of incoming air. The flow-control function provides a mechanically adjustable restriction using the slotted screw. The specified 40 l/min nominal flow and 0–10 bar operating range define component limits; the volume and changing pressure difference determine the resulting charging time.

Problem Solved

The adjustable restriction changes the incoming air flow during charging, giving the fixture a local tuning element for pressure-rise behaviour as the volume approaches the available supply pressure.

Adjustable restriction 40 l/min nominal 0–10 bar
Select your currency