1. Metered Travel of a Pneumatic Slide
A pneumatic slide needs a controlled working stroke rather than unrestricted exhaust discharge. Installed in a suitable actuator exhaust path, this valve provides an adjustable restriction through its knurled adjustment screw. The G3/8 connections fit the corresponding circuit connections, and the documented 1010 l/min standard nominal controlled flow characterizes the selected valve size.
Problem Solved
Adjustable exhaust restriction gives the machine builder a local means of setting pneumatic travel behavior, while the knurled screw provides direct manual adjustment.
Exhaust-air metering
1010 l/min nominal
Knurled screw
2. Pneumatic Volume Charging and Reverse Flow
A pneumatic fixture charges a small working volume through an adjustable restriction and subsequently permits air to flow back through the same line. The one-way flow-control function distinguishes the throttled and opposite flow directions. The manufacturer specifies 1010 l/min nominal controlled flow and a separate 1150 l/min opposite-direction nominal rating, characterising the two component flow paths.
Problem Solved
Directional throttling adjusts incoming flow while providing a different reverse-flow path, giving the fixture distinct charging and return-flow behaviour through the same pair of connections.
One-way function
1010 l/min controlled
1150 l/min opposite
3. Panel-accessible Pneumatic Adjustment
A machine operator needs access to a pneumatic restriction during setup without reaching into the internal tube layout. This valve supports front-panel mounting and has a knurled adjustment screw. Its two G3/8 female ports connect the selected branch behind the panel, while the alternative through-hole mounting method accommodates a fixed machine bracket when a panel interface is unnecessary.
Problem Solved
The documented mounting choices place manual flow adjustment at an accessible location, giving the machine a practical interface for setting directional pneumatic restriction during setup.
Front-panel mounting
Knurled screw
G3/8 ports