1. Double-Acting Cylinder Direction Control
A transfer fixture needs to alternate pressure and exhaust between the two chambers of a double-acting cylinder. The valve's single-solenoid 5/2 function provides the two routing states, with mechanical spring reset. G1/4 connections and 1000 l/min standard nominal flow define the pneumatic interface, while a separately ordered F coil establishes the electrical actuation configuration.
Problem Solved
The five-port routing function supplies the cylinder's directional pressure and exhaust paths, combining an electrical command and mechanical spring reset for the fixture's pneumatic sequence.
5/2 single solenoid
Mechanical spring reset
G1/4 ports
2. Exhaust-Flow Setup for a Pneumatic Mechanism
A pneumatic mechanism needs its exhaust path arranged to suit the intended motion behaviour. Festo specifies that this valve's exhaust can be throttled, allowing appropriate external flow-control components in the surrounding circuit. The 2.2–8 bar working range and non-reversible flow direction define the valve conditions, while the actuator load and installed restriction determine the resulting motion.
Problem Solved
Throttleable exhaust permits flow-control elements to shape the connected mechanism's exhaust behaviour, providing a defined routing component for tuning the pneumatic motion in its intended flow direction.
Throttleable exhaust
2.2–8 bar
Non-reversible flow
3. Local Routing Checks during Commissioning
During machine commissioning, a technician needs to exercise the valve's pneumatic routing at the component before completing the sequence setup. The detenting manual override provides local actuation, while manifold-rail or through-hole mounting locates the body in the assembly. Separate 9 ms on and 29 ms off specifications characterise component switching for the subsequent electrical sequence.
Problem Solved
A local manual override lets the technician exercise the valve routing during setup, while the documented mounting and switching data support integration into the machine's pneumatic sequence.
Detenting override
9 ms on / 29 ms off
Manifold or through-hole