Sale!

Festo 578162 5/2-Way Solenoid Valve, M5, 24 V DC

Original price was: USD 55.38.Current price is: USD 48.10.

10 mm single-solenoid valve with mechanical spring reset, 220 l/min nominal flow, two-pin horizontal H interface, open-ended cable and IP40.

SKU Festo-578162 Category
Festo Solenoid Valves

Festo VUVG-L10-M52-MT-M5-1H2L-W1 5/2-Way Solenoid Valve

BrandFesto
Model IdentifierVUVG-L10-M52-MT-M5-1H2L-W1
Official Part Number578162

Technical Overview

The Festo VUVG-L10-M52-MT-M5-1H2L-W1 is a 10 mm single-solenoid valve providing 5/2-way pneumatic switching with mechanical spring reset. Its internally piloted piston-gate design operates at 3–8 bar, with 220 l/min standard nominal flow and M5 working connections. The 24 V DC, 1.0 W coil interface uses a two-pin horizontal H plug pattern and an open-ended cable, with 8 ms switch-on and 24 ms switch-off times. The 44 g body supports manifold-rail or through-hole mounting and manual override. IP40 applies with a plug socket; ambient and media ratings of −5 to 60 °C are restricted to 50 °C without holding-current reduction.

10 mm 5/2-way single-solenoid valve with M5 working ports, mechanical spring reset, two-pin H interface and 220 l/min nominal flow.

Key Features

  • 5/2-way single-solenoid function with mechanical spring reset
  • 10 mm valve size and 2.2 mm nominal passage
  • 220 l/min standard nominal flow to DIN 1343
  • M5 pneumatic working connections and 3–8 bar operating range
  • Internal pilot air with 3–8 bar pilot-pressure range
  • 24 V DC, 1.0 W coil data and 100% duty cycle
  • Two-pin horizontal H plug pattern with open-ended cable
  • 8 ms switch-on and 24 ms switch-off times
  • 44 g product weight, manual override and manifold-rail or through-hole mounting
  • IP40 with plug socket; Class 5 cleanroom suitability

Control an M5 double-acting pneumatic circuit from a 10 mm valve with mechanical spring reset and a two-pin horizontal H electrical interface.

Technical Specification Matrix

ParameterValue
Valve function5/2-way, single solenoid
Type of actuationElectrical
Valve size10 mm
Standard nominal flow rate (standardised to DIN 1343)220 l/min
pneumatic working portM5
Operating voltage24 V DC
Operating pressure0.3 MPa...0.8 MPa; 3 bar...8 bar
DesignPiston gate valve
Type of resetMechanical spring
ApprovalRCM; c UL us - Recognised (Oil)
CE mark (see declaration of conformity)To EU EMC Directive; To EU Low Voltage Directive; In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK instructions for EMC; To UK RoHS instructions; To UK regulations for electrical equipment
Degree of protectionIP40; With plug socket
Nominal size2.2 mm
Exhaust-air functionCan be throttled
Sealing principleSoft
Mounting positionAny
Manual overrideDetenting; Non-detenting; Concealed
Type of pilotingPiloted
Pilot air supplyInternal
lapOverlap
Pilot pressure0.3 MPa...0.8 MPa; 3 bar...8 bar
Suitability for vacuumNo
Switching time off24 ms
Switching time on8 ms
Duty cycle100%
Max. positive test pulse with 0 signal700 µs
Max. negative test pulse with 1 signal900 µs
Characteristic coil data24 V DC: 1.0 W
Permissible voltage fluctuations+/-10%
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN; 60068-2-6
Restrictions for environmental and media temperature-5 - 50 °C; Without holding current reduction
Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Cleanroom suitability, measured according to ISO 14644-14Class 5 according to ISO 14644-1
Media temperature-5 °C...60 °C
Ambient temperature-5 °C...60 °C
Physical Weight (kg)0.044
Electrical connection2-pin; Plug pattern H, horizontal connection; Cable with open end
Type of mountingEither:; On manifold rail; With through-hole
Pneumatic connection, port 1M5
Pneumatic connection, port 2M5
Pneumatic connection, port 4M5
Pneumatic connection, port 5M5
Note on materialsRoHS compliant
Material sealsHNBR; NBR
Material housingWrought aluminium alloy

Industrial Applications

1. Reciprocating Part-Transfer Cylinder

An assembly machine uses a double-acting cylinder to transfer a component between two nearby positions. The valve's 5/2-way function alternates pressure and exhaust between the M5 working connections. One 24 V DC solenoid commands the valve, with mechanical spring reset providing its alternate state. The 10 mm body and manifold mounting support grouping the pneumatic controls in the machine.

Problem Solved

Two working ports provide the directional switching needed for extension and retraction, while compact manifold mounting keeps the transfer mechanism's pneumatic controls grouped together.

5/2-way M5 working ports 10 mm valve

2. Pneumatic Gripper Open-and-Close Sequencing

A handling unit needs a solenoid command and mechanical reset state for a double-acting pneumatic gripper. This valve routes pressure and exhaust between the gripper’s two air lines through its 5/2-way function. Internal pilot air operates within 3–8 bar, and the two-pin horizontal H connection with open-ended cable connects the valve’s 24 V DC command to machine wiring.

Problem Solved

Single-solenoid routing and mechanical spring reset provide two valve states for the gripper circuit, while the open-ended cable supports connecting the electrical command to the machine control wiring.

Mechanical spring reset 24 V DC Two-pin H interface

3. Two-Position Product Diverter Actuation

A packaging conveyor uses a pneumatic actuator to move a small product diverter between two routes. This valve selects the actuator's air connections through its 5/2-way function, with 8 ms switch-on and 24 ms switch-off times specified for the component. The 220 l/min nominal flow and M5 working connections characterise the selected valve for evaluating the pneumatic arrangement.

Problem Solved

Directional switching operates the diverter between its two routes, while the documented switching times and nominal flow provide component data for planning the pneumatic command sequence.

8 ms on 24 ms off 220 l/min nominal
Select your currency