Festo 189268 ESS-2-SNA Antistatic Suction Cup, 2 mm, NBR

USD 24.96

Round flat antistatic NBR suction cup with 2 mm diameter, 200 Ω surface resistance, 0.1 N holding force at −0.7 bar and a top 3 mm outside-diameter port.

SKU Festo-ESS-2-SNA Category
Festo Vacuum Suction Cups

Festo ESS-2-SNA Antistatic Suction Cup with Connection

BrandFesto
Model IdentifierESS-2-SNA
Official Part Number189268

Technical Overview

The Festo ESS-2-SNA is a round, flat suction cup with a 2 mm diameter, antistatic NBR material and a top vacuum connection of 3 mm outside diameter. It has a nominal passage of 0.6 mm and a suction volume of 0.002 cm³, with size 1 holder allocation and mounting through the vacuum port. At the nominal −0.7 bar operating pressure, the specified holding force is 0.1 N and lateral force is 0.5 N. The cup supports a 4 bar ejector pulse and has 200 Ω surface resistance, Shore hardness 50 ±5 and a −10 to 70 °C ambient range.

2 mm round flat antistatic NBR suction cup with 200 Ω surface resistance, 0.1 N nominal holding force and top vacuum connection.

Key Features

  • 2 mm suction-cup diameter and round, flat shape
  • Antistatic NBR cup with 200 Ω surface resistance
  • 0.1 N holding force and 0.5 N lateral force at −0.7 bar nominal pressure
  • −0.95 to 0 bar operating-pressure range
  • 0.6 mm nominal passage and 0.002 cm³ suction volume
  • Suitable for a 4 bar ejector pulse
  • Top vacuum port with 3 mm outside diameter; size 1 holder allocation
  • 10 mm minimum workpiece radius and Shore hardness 50 ±5
  • 0.1 g product weight and −10 to 70 °C ambient range
  • Nickel-plated brass screwed plug and black/white-dot cup identification

Grip small sealable contact areas with a 2 mm flat antistatic NBR cup rated at 0.1 N holding force at −0.7 bar.

Technical Specification Matrix

ParameterValue
Min. workpiece radius10 mm
Nominal size0.6 mm
Suction cup diameter2 mm
Suction cup volume0.002 cm³
Suitable for ejector pulse4 bar
Position of connectionOn top
Mounting positionAny
Special characteristicsAntistatic
Correlation to suction-cup holderSize 1
Suction cup shapeRound, flat
Operating pressure-95 kPa...0 kPa; -0.95 bar...0 bar; -13.775 psi...0 psi
Nominal operating pressure-70 kPa; -0.7 bar; -10.15 psi
Surface resistance200 Ohm
Operating mediumAtmospheric air based on ISO 8573-1:2010 [7:-:-]
Corrosion resistance class CRC1 - Low corrosion stress
LABS (PWIS) conformityVDMA24364-A1-L
Suitable for use with foodSee supplementary material information
Ambient temperature-10 °C...70 °C
Holding force at nominal operating pressure0.1 N
Lateral force at nominal operating pressure0.5 N
Physical Weight (kg)0.0001
Type of mountingVia vacuum port
Vacuum connectionOutside diameter 3 mm
ColourBlack/white dot
Shore hardness50 +/-5
Material screwed plugNickel-plated brass
Note on materialsRoHS compliant
Material suction cupNBR

Industrial Applications

1. Small-Component Pickup from a Fixture

An assembly fixture needs a small vacuum contact to lift a component with a sealable surface. The 2 mm round flat cup provides the contact geometry, and its 0.1 N holding-force rating at −0.7 bar defines the documented grip reference. The 10 mm minimum workpiece radius limits the curvature of a contact surface when the component is not flat.

Problem Solved

A small flat vacuum contact accesses a limited gripping area, with the nominal holding-force and surface-curvature data defining the cup’s documented basis for the pickup task.

2 mm flat cup 0.1 N at −0.7 bar 10 mm minimum radius

2. Antistatic Contact for Electronics Assembly Handling

An electronics assembly station needs a vacuum contact made from antistatic material when moving a small component with a suitable sealing surface. The SNA cup uses NBR with a specified surface resistance of 200 Ω. Its 2 mm diameter provides a small contact footprint, while the handling system’s complete electrostatic-control performance depends on the remaining tooling and installation.

Problem Solved

The antistatic NBR contact provides the documented low-resistance cup material for the handling tool, supporting an electrostatic-control design without assigning a system-level protection rating to the cup alone.

Antistatic NBR 200 Ω surface resistance 2 mm diameter

3. Ejector-Pulse Release after Placement

A pick-and-place mechanism needs to release a small part after positioning it in its destination nest. This cup is specified as suitable for a 4 bar ejector pulse and has a suction volume of 0.002 cm³. A top vacuum connection supplies the vacuum and release path, allowing the pneumatic sequence to change from holding to part separation.

Problem Solved

Ejector-pulse suitability provides a documented pneumatic release mechanism at the suction contact, supporting part separation after placement rather than relying only on the removal of vacuum.

4 bar ejector pulse 0.002 cm³ cup volume Top vacuum connection
Select your currency