1. Flat-Component Pickup from an Assembly Nest
An assembly machine needs to lift a component from a nest using an accessible sealing surface. The 10 mm round flat cup provides the vacuum contact, with 3.9 N holding force specified at −0.7 bar. Its top M4 connection attaches the cup to suitable vacuum tooling, while the complete pickup load depends on sealing quality, acceleration and the installed mechanism.
Problem Solved
The flat vacuum contact lifts a sealable component from its nest, and the documented nominal holding force gives the tool designer a defined reference for that pickup task.
10 mm flat cup
3.9 N at −0.7 bar
M4 vacuum connection
2. Lateral Restraint during Component Transfer
A handling mechanism moves a gripped component sideways, creating a load parallel to the suction contact. This cup has a separately specified lateral force of 3.5 N at −0.7 bar nominal pressure. The NBR contact and 10 mm flat geometry provide the gripping interface, allowing the lateral-load requirement to be evaluated separately from the lifting-force reference.
Problem Solved
A separate lateral-force rating characterizes sideways loading at the vacuum contact, supporting transfer arrangements where the holding demand includes more than force normal to the component surface.
3.5 N lateral force
NBR contact
−0.7 bar nominal
3. Temporary Vacuum Holding in an Assembly Fixture
A fixture needs to retain a small sealable component at a defined location during an assembly step. The cup supplies a flat NBR vacuum contact mounted through its top M4 connection, with 0.05 cm³ suction volume. Continuous vacuum from the surrounding circuit maintains the holding condition, while fixture supports determine how process forces are carried by the complete tooling.
Problem Solved
A compact vacuum contact provides temporary component retention at the fixture, with an M4 mounting connection and documented cup volume for integrating the holding point into the pneumatic tooling.
Temporary vacuum retention
0.05 cm³ volume
Top M4 connection