1. Local Vacuum for a Suction Handling Head
A pick-and-place head needs a vacuum source close to its suction circuit. This ejector generates vacuum from compressed air through a 1.4 mm Laval nozzle and connects to the vacuum line through a G1/4 thread. Its 88% maximum vacuum and 51.6 l/min maximum atmospheric suction flow are documented at different supply conditions, providing separate performance references for the handling circuit.
Problem Solved
The compressed-air ejector supplies a local suction source with documented vacuum and flow characteristics, supporting a handling head whose cup and workpiece sealing determine the resulting holding performance.
88% maximum vacuum
1.4 mm nozzle
G1/4 vacuum
2. Vacuum Supply for an Assembly Holding Fixture
An assembly fixture holds a suitably sealed component against a suction support while a separate tool performs its operation. The high-vacuum ejector supplies the fixture through its G1/4 vacuum connection and operates from a compressed-air supply within 1–8 bar. Through-hole or accessory mounting places the 36 g generator on the fixture structure without requiring a particular mounting orientation.
Problem Solved
A dedicated ejector supplies the fixture suction circuit locally, while flexible mounting and a defined compressed-air interface support integrating vacuum generation with the assembly tooling.
High-vacuum ejector
1–8 bar supply
36 g
3. Vacuum Station with a Routed Exhaust Line
A machine layout needs the vacuum generator exhaust connection routed away from the immediate suction-head area. This variant provides a G1/4 connection at port 3 and vacuum, with a G1/8 supply-air interface. Its T-shaped design and any-position mounting support arranging those three tubing paths around the tooling, while the 18 mm mounting grid pitch provides a documented spacing reference.
Problem Solved
The dedicated G1/4 exhaust connection provides a tubing interface for the machine exhaust arrangement, allowing supply, suction and exhaust paths to be incorporated into the station layout.
G1/4 exhaust port
T-shaped design
18 mm grid