1. Reciprocating Part-Transfer Cylinder
An assembly machine uses a double-acting cylinder to transfer a component between two nearby positions. The valve's 5/2-way function alternates pressure and exhaust between the flange working interface. One 24 V DC solenoid commands the valve, with pneumatic spring reset providing its alternate state. The 14 mm body and manifold mounting support grouping the pneumatic controls in the machine.
Problem Solved
Two working ports provide the directional switching needed for extension and retraction, while compact manifold mounting keeps the transfer mechanism's pneumatic controls grouped together.
5/2-way
Flange working interface
14 mm valve
2. Pneumatic Gripper Open-and-Close Sequencing
A handling unit needs a solenoid command and pneumatic reset state for a double-acting pneumatic gripper. This valve routes pressure and exhaust between the gripper’s two air lines through its 5/2-way function. External pilot air operates at 1.5–8 bar, and the E-box connects the valve’s 24 V DC operating interface to the electrical control arrangement.
Problem Solved
Single-solenoid routing and pneumatic spring reset provide two valve states for the gripper circuit, while the E-box supplies a defined electrical interface for the machine control command.
Pneumatic spring reset
24 V DC operating interface
E-box connection
3. Two-Position Product Diverter Actuation
A packaging conveyor uses a pneumatic actuator to move a small product diverter between two routes. This valve selects the actuator's air connections through its 5/2-way function, with 13 ms switch-on and 26 ms switch-off times specified for the component. The 500 l/min nominal flow and flange working interface characterise the selected valve for evaluating the pneumatic arrangement.
Problem Solved
Directional switching operates the diverter between its two routes, while the documented switching times and nominal flow provide component data for planning the pneumatic command sequence.
13 ms on
26 ms off
500 l/min nominal