Sale!

Festo 193970 One-Way Flow Control Valve, QS-8, 265 l/min

Original price was: USD 21.32.Current price is: USD 19.24.

QS-8 inline one-way flow control with knurled adjustment, 265 l/min nominal controlled flow, panel or through-hole mounting and 23 g product weight.

SKU Festo-193970 Category
Festo Flow Control Valves

Festo GR-QS-8 One-Way Flow Control Valve

BrandFesto
Model IdentifierGR-QS-8
Official Part Number193970

Technical Overview

The Festo GR-QS-8 is an inline one-way flow control valve with QS-8 connections at both ports and a knurled adjustment screw. Its standard nominal flow is 265 l/min in the flow-control direction and 500 l/min in the manufacturer-labelled blocked direction. The valve operates at 0.2–10 bar with compressed air to ISO 8573-1:2010 [7:4:4], over a −10 to +60 °C ambient and media range. Front-panel, through-hole or accessory mounting supports local adjustment in any orientation. The 23 g assembly uses a reinforced PA housing and knurled head, NBR seals, POM release rings and a high-alloy-steel adjusting screw.

QS-8 one-way flow control valve with knurled adjustment, 265 l/min nominal controlled flow and panel, through-hole or accessory mounting.

Key Features

  • One-way flow-control function
  • QS-8 connections at ports 1 and 2
  • Knurled screw for manual restriction adjustment
  • 265 l/min standard nominal flow in the controlled direction
  • 500 l/min standard nominal flow in the manufacturer-labelled blocked direction
  • 0.2–10 bar operating pressure
  • Front-panel, through-hole or accessory mounting in any position
  • 23 g product weight
  • −10 to +60 °C ambient and media range
  • Reinforced PA housing/head, NBR seals and high-alloy-steel adjusting screw

Place manual directional airflow adjustment at a panel or inline QS-8 connection with a knurled screw and 23 g valve assembly.

Technical Specification Matrix

ParameterValue
Valve functionOne-way flow control function
Pneumatic connection, port 1QS-8
Pneumatic connection, port 2QS-8
Adjustment componentKnurled screw
Type of mountingEither:; Front panel mounting; With through-hole; With accessories
Standard nominal flow rate in flow control direction265 l/min
Standard nominal flow rate in blocked direction500 l/min
Operating pressure0.2 bar...10 bar
Ambient temperature-10 °C...60 °C
Material housingReinforced PA
Explosion protectionThe information in the certificate must be observed!; Zone 1 (ATEX); Zone 2 (ATEX); Zone 21 (ATEX); Zone 22 (ATEX)
Mounting positionAny
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
LABS (PWIS) conformityVDMA24364-B1/B2-L
Media temperature-10 °C...60 °C
Physical Weight (kg)0.023
Note on materialsRoHS compliant
Material sealsNBR
Material release ringPOM
Material knurled headReinforced PA
Material adjusting screwHigh-alloy steel

Industrial Applications

1. Inline Travel Adjustment for a Pneumatic Slide

A machine needs a local means of restricting airflow in one selected direction of a slide circuit. The GR-QS-8 inserts between two 8 mm tube connections and uses a knurled screw to set the restriction. Its one-way function and 265 l/min standard nominal controlled-direction flow provide documented characteristics for the selected circuit component.

Problem Solved

Adjustable one-way restriction gives the slide circuit a local airflow setting, allowing the selected movement direction to be tuned through a directly accessible knurled screw.

One-way flow control QS-8 265 l/min nominal

2. Separate Directional Setting for a Fixture Mechanism

A pneumatic fixture can require different engagement and withdrawal behavior when its mechanism approaches or clears a component. The valve provides one-way flow control rather than an identical fixed restriction in both directions. QS-8 connections permit inline installation, while the 0.2–10 bar operating range and published directional flow figures characterize the selected valve within the fixture circuit.

Problem Solved

The one-way function supplies a directional adjustment point for the fixture, supporting different pneumatic travel behavior for the selected stroke within the complete actuator circuit.

Directional adjustment 0.2–10 bar QS-8 tubing

3. Panel-Accessible Airflow Setting on a Test Fixture

A pneumatic test fixture needs an accessible manual restriction setting while the connected tubing remains behind the operator panel. This valve supports front-panel mounting and uses a knurled screw for adjustment, with QS-8 connections at both ports. Its 23 g assembly and any-position mounting provide documented installation characteristics for incorporating the adjustment point into the fixture layout.

Problem Solved

Front-panel mounting brings the manual restriction control to the fixture panel, keeping a defined adjustment point accessible while the pneumatic connections remain integrated with the test circuit.

Front-panel mounting Knurled screw 23 g
Select your currency