Sale!

Festo 566510 5/3-Way Closed-Centre Valve, G1/8, 24 V DC

Original price was: USD 74.10.Current price is: USD 64.48.

Externally piloted closed-center valve with spring reset, G1/8 ports, 620–650 l/min nominal flow, electrical sub-base connection and vacuum suitability.

SKU Festo-566510 Category
Festo Solenoid Valves

Festo VUVG-L14-P53C-ZT-G18-1P3 5/3-Way Closed-Centre Valve

BrandFesto
Model IdentifierVUVG-L14-P53C-ZT-G18-1P3
Official Part Number566510

Technical Overview

The Festo VUVG-L14-P53C-ZT-G18-1P3 provides 5/3-way directional switching with a closed centre, mechanical spring reset and G1/8 pneumatic connections. Its 14 mm piston gate design is externally piloted with 3–8 bar external pilot pressure and a −0.9 to 10 bar working range and delivers 620–650 l/min standard nominal flow. Electrical actuation uses 24 V DC through a sub-base, with continuous duty and coil data specifying a 1.0 W high-current phase and 0.3 W low-current phase. The valve supports manifold-rail or through-hole mounting and throttleable exhaust. Ambient and media limits are −5 to +60 °C, reduced to +50 °C without holding-current reduction; IP40/IP65 ratings are listed with a plug socket.

G1/8 5/3-way closed-centre solenoid valve with 24 V DC actuation, spring reset, external pilot supply and 620–650 l/min nominal flow.

Key Features

  • 5/3-way directional function with closed centre
  • 14 mm valve size and 5.6 mm nominal size
  • 620–650 l/min standard nominal flow rate to DIN 1343
  • G1/8 pneumatic ports 1, 2, 3, 4 and 5
  • −0.9 to 10 bar working pressure; external 3–8 bar pilot supply through M5 port 12/14
  • Mechanical spring reset and soft-sealing piston gate construction
  • 24 V DC electrical sub-base connection; 100% duty cycle
  • Coil high-current phase 1.0 W; low-current phase 0.3 W
  • 12 ms on, 40 ms off and 20 ms reversal times
  • IP40/IP65 listed with plug socket; −5 to +50 °C without holding-current reduction

Provide forward, reverse and closed-centre pneumatic states through G1/8 ports with 620–650 l/min nominal flow in an 14 mm valve.

Technical Specification Matrix

ParameterValue
Valve function5/3-way, closed
Type of actuationElectrical
Valve size14 mm
Standard nominal flow rate (standardised to DIN 1343)620 l/min...650 l/min
pneumatic working portG1/8
Operating voltage24 V DC
Operating pressure-0.09 MPa...1 MPa; -0.9 bar...10 bar
DesignPiston gate valve
Type of resetMechanical spring
ApprovalRCM; c UL us - Recognised (Oil)
CE mark (see declaration of conformity)To EU EMC Directive; To EU Low Voltage Directive; In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK instructions for EMC; To UK RoHS instructions; To UK regulations for electrical equipment
Degree of protectionIP40; IP65; With plug socket
Nominal size5.6 mm
Exhaust-air functionCan be throttled
Sealing principleSoft
Mounting positionAny
Manual overrideDetenting; Non-detenting; Concealed
Type of pilotingPiloted
Pilot air supplyExternal
lapOverlap
Pilot pressure0.3 MPa...0.8 MPa; 3 bar...8 bar
Suitability for vacuumYes
Switching time off40 ms
Switching time on12 ms
Switching time reversal20 ms
Duty cycle100%
Max. positive test pulse with 0 signal700 µs
Max. negative test pulse with 1 signal900 µs
Characteristic coil data24 V DC: 1.0 W; 24 V DC: low-current phase 0.3 W, high-current phase 1.0 W
Permissible voltage fluctuations+/-10%
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN; 60068-2-6
Restrictions for environmental and media temperature-5 - 50 °C; Without holding current reduction
Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Cleanroom suitability, measured according to ISO 14644-14Class 5 according to ISO 14644-1
Media temperature-5 °C...60 °C
Pilot mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Ambient temperature-5 °C...60 °C
Physical Weight (kg)0.089
Electrical connectionVia electrical sub-base
Type of mountingEither:; On manifold rail; With through-hole
Pilot air port 12/14M5
Pneumatic connection, port 1G1/8
Pneumatic connection, port 2G1/8
Pneumatic connection, port 3G1/8
Pneumatic connection, port 4G1/8
Pneumatic connection, port 5G1/8
Note on materialsRoHS compliant
Material sealsHNBR; NBR
Material housingWrought aluminium alloy

Industrial Applications

1. Three-State Linear Transfer Control

A pneumatic transfer axis needs extension, retraction and a neutral command between machine steps. The 5/3-way valve connects a double-acting cylinder to two directional states and a closed-centre state. Its G1/8 ports and 620–650 l/min standard nominal flow provide a defined connection and flow basis for selecting the surrounding cylinder circuit.

Problem Solved

A closed-centre third state blocks the valve's working paths between directional commands, giving the controller a distinct neutral circuit state alongside extension and retraction.

5/3-way closed centre G1/8 620–650 l/min nominal

2. Gripper Circuit with a Neutral Valve State

A handling machine operates a double-acting pneumatic gripper through open, close and neutral valve commands. The valve's closed-centre function provides the third circuit state, while spring reset returns the spool when its actuation is removed. External pilot air and a sub-base electrical connection support grouping the gripper controls with other pneumatic functions on a manifold rail.

Problem Solved

Three valve states support a gripper sequence with a defined neutral connection state, while external piloting and manifold mounting consolidate the pneumatic control assembly.

Closed centre Spring reset Manifold mounting

3. Reversible Pneumatic Motor Command Circuit

A machine uses a suitable reversible pneumatic motor for a positioning or winding task. The 5/3-way arrangement provides two directional air-routing commands and a closed-centre neutral command through the G1/8 working ports. The specified switching times support sequence planning; the motor's run-down and mechanical stopping behaviour remain properties of the complete motor and load system.

Problem Solved

One directional valve provides forward, reverse and neutral air-routing commands, allowing the machine controller to select the required circuit state through its electrical sub-base.

Forward/reverse/neutral 24 V DC 20 ms reversal
Select your currency