Sale!

Festo 560223 Parallel Gripper, 12 mm/Jaw, Opening Force Backup

Original price was: USD 1,123.72.Current price is: USD 964.08.

Size 50 two-jaw gripper with 0.05 mm repetition accuracy, G1/8 ports, proximity-switch detection, hardened-steel jaws and opening gripping-force backup.

SKU Festo-560223 Category
Festo Parallel Grippers

Festo HGPT-50-A-B-G1 Parallel Gripper

BrandFesto
Model IdentifierHGPT-50-A-B-G1
Official Part Number560223

Technical Overview

The Festo HGPT-50-A-B-G1 is a size 50 parallel gripper with two jaws and 12 mm stroke per jaw. Its wedge-shaped drive produces synchronized parallel motion, with double-acting pneumatic operation and gripping-force backup during opening. Gripper repetition accuracy is 0.05 mm, and proximity switches provide the supported position-detection method. The 1832 g assembly operates at 4–8 bar through G1/8 connections, with a separate M5 sealing-air connection rated at 0–0.5 bar. An anodised aluminium housing, hardened-steel jaws and stainless-steel cover form the IP40 unit. Centring sleeves or dowel pins locate its threaded or through-hole mounting interface.

Size 50 double-acting parallel gripper with 12 mm stroke per jaw, opening gripping-force backup and 0.05 mm repetition accuracy.

Key Features

  • Size 50 two-jaw parallel gripper with wedge-shaped drive
  • 12 mm stroke per gripper jaw
  • Double-acting operation with gripping-force backup during opening
  • 0.05 mm gripper repetition accuracy
  • Proximity-switch position detection
  • 4–8 bar operation with G1/8 pneumatic connections
  • Separate M5 sealing-air connection for 0–0.5 bar
  • 70 ms opening and 153 ms closing minimum component times at 6 bar
  • 1832 g product weight and IP40 protection
  • Anodised aluminium housing, hardened-steel jaws and stainless-steel cover

Grip from inside a component opening with parallel jaw travel and opening-direction force backup, using 12 mm stroke per jaw.

Technical Specification Matrix

ParameterValue
Size50
Stroke per gripper jaws12 mm
Max. replacement accuracy0.2 mm
Max. angular gripper jaw backlash ax, ay0.1 deg
Max. gripper jaw backlash Sz0.02 mm
Rotationally symmetrical0.2 mm
Repetition accuracy, gripper0.05 mm
Number of gripper jaws2
Drive systemPneumatic
Mounting positionAny
Mode of operationDouble-acting
Gripper functionParallel
Gripper force back-upDuring opening
DesignWedge-shaped drive; Force pilot operated motion sequence
Position detectionVia proximity switch
Operating pressure4 bar...8 bar
Sealing-air operating pressure0 bar...0.5 bar
Max. operating frequency of gripper2 Hz
Min. opening time at 0.6 MPa (6 bar, 87 psi)70 ms
Min. closing time at 0.6 MPa (6 bar, 87 psi)153 ms
Max. mass per external gripper finger640 g
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Degree of protectionIP40
Ambient temperature5 °C...60 °C
Mass moment of inertia29.423 kgcm²
Max. force on gripper jaw Fz static3200 N
Max. torque at gripper Mx static120 Nm
Max. torque at gripper My static120 Nm
Max. torque at gripper Mz static100 Nm
Lubrication interval for guide components5 MioCyc
Physical Weight (kg)1.832
Type of mountingEither:; Via female thread and centring sleeve; Via through-hole and centring sleeve; Via through-hole and dowel pin; Via female thread and dowel pin
Sealing-air connectionM5
Pneumatic connectionG1/8
Note on materialsRoHS compliant
Material cover capHigh-alloy stainless steel
Material housingAnodised aluminium
Material gripper jawsHardened steel

Industrial Applications

1. Internal Gripping of Components with Accessible Openings

A transfer tool handles a component from an accessible internal opening, leaving the exterior free for the next operation. The gripper’s two parallel jaws move outward through 12 mm stroke per jaw, and the G1 version provides gripping-force backup during opening. Application-specific fingers establish the contact geometry, while the wedge mechanism synchronizes the jaw movement.

Problem Solved

Powered parallel opening and opening-direction force backup supply the mechanical action for an internal grip, preserving access to the component’s exterior during the handling operation.

12 mm per jaw Opening force backup Parallel gripping

2. Repeated Component Placement in an Assembly Nest

An assembly station repeatedly brings a held component to a locating nest and needs consistent gripper movement. The HGPT-50-A-B-G1 specifies 0.05 mm repetition accuracy, with hardened-steel jaws and a wedge-shaped drive. Centring sleeves or dowel pins locate the body on its handling attachment, providing a defined mechanical reference while the nest establishes the component’s final position.

Problem Solved

Specified jaw repeatability and located mounting provide consistent mechanical interfaces for repeated placement, helping the handling attachment preserve its relationship with the assembly nest.

0.05 mm repetition Located mounting Hardened-steel jaws

3. Position-Observed Loading and Release

A loading mechanism must coordinate jaw movement with transfer-axis motion and fixture release. The gripper supports proximity-switch position detection so the controller can observe the selected jaw state before advancing the sequence. Documented minimum opening and closing times at 6 bar are 70 ms and 153 ms, characterizing the actuator movement within the complete handling cycle.

Problem Solved

Jaw-position detection supplies feedback for coordinating loading and release, while documented component movement times provide a basis for evaluating the gripper step in the machine sequence.

Proximity-switch detection 70 ms opening 153 ms closing
Select your currency