Sale!

Festo 560194 Parallel Gripper, 3 mm/Jaw, Closing Force Backup

Original price was: USD 590.72.Current price is: USD 507.00.

Size 16 two-jaw gripper with 0.03 mm repetition accuracy, M5 ports, proximity-switch detection, hardened-steel jaws and closing gripping-force backup.

SKU Festo-560194 Category
Festo Parallel Grippers

Festo HGPT-16-A-B-G2 Parallel Gripper

BrandFesto
Model IdentifierHGPT-16-A-B-G2
Official Part Number560194

Technical Overview

The Festo HGPT-16-A-B-G2 is a size 16 parallel gripper with two jaws and 3 mm stroke per jaw. Its wedge-shaped drive produces synchronized parallel motion, with double-acting pneumatic operation and gripping-force backup during closing. Gripper repetition accuracy is 0.03 mm, and proximity switches provide the supported position-detection method. The 100 g assembly operates at 4–8 bar through M5 connections, with a separate M3 sealing-air connection rated at 0–0.5 bar. An anodised aluminium housing, hardened-steel jaws and stainless-steel cover form the IP40 unit. Centring sleeves or dowel pins locate its threaded or through-hole mounting interface.

Size 16 double-acting parallel gripper with 3 mm stroke per jaw, closing gripping-force backup and 0.03 mm repetition accuracy.

Key Features

  • Size 16 two-jaw parallel gripper with wedge-shaped drive
  • 3 mm stroke per gripper jaw
  • Double-acting operation with gripping-force backup during closing
  • 0.03 mm gripper repetition accuracy
  • Proximity-switch position detection
  • 4–8 bar operation with M5 pneumatic connections
  • Separate M3 sealing-air connection for 0–0.5 bar
  • 22 ms opening and 15 ms closing minimum component times at 6 bar
  • 100 g product weight and IP40 protection
  • Anodised aluminium housing, hardened-steel jaws and stainless-steel cover

Grip the exterior of a component with parallel jaw travel and closing-direction force backup, using 3 mm stroke per jaw.

Technical Specification Matrix

ParameterValue
Size16
Stroke per gripper jaws3 mm
Max. replacement accuracy0.2 mm
Max. angular gripper jaw backlash ax, ay0.1 deg
Max. gripper jaw backlash Sz0.02 mm
Rotationally symmetrical0.2 mm
Repetition accuracy, gripper0.03 mm
Number of gripper jaws2
Drive systemPneumatic
Mounting positionAny
Mode of operationDouble-acting
Gripper functionParallel
Gripper force back-upDuring closing
DesignWedge-shaped drive; Force pilot operated motion sequence
Position detectionVia proximity switch
Operating pressure4 bar...8 bar
Sealing-air operating pressure0 bar...0.5 bar
Max. operating frequency of gripper3 Hz
Min. opening time at 0.6 MPa (6 bar, 87 psi)22 ms
Min. closing time at 0.6 MPa (6 bar, 87 psi)15 ms
Max. mass per external gripper finger40 g
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Degree of protectionIP40
Ambient temperature5 °C...60 °C
Mass moment of inertia0.163 kgcm²
Max. force on gripper jaw Fz static200 N
Max. torque at gripper Mx static10 Nm
Max. torque at gripper My static12 Nm
Max. torque at gripper Mz static6 Nm
Lubrication interval for guide components5 MioCyc
Physical Weight (kg)0.1
Type of mountingEither:; Via female thread and centring sleeve; Via through-hole and centring sleeve; Via through-hole and dowel pin; Via female thread and dowel pin
Sealing-air connectionM3
Pneumatic connectionM5
Note on materialsRoHS compliant
Material cover capHigh-alloy stainless steel
Material housingAnodised aluminium
Material gripper jawsHardened steel

Industrial Applications

1. External Gripping of Small Components

A transfer tool picks a small component by its outer faces while leaving its central opening accessible. The gripper’s two parallel jaws provide 3 mm stroke per jaw, and the G2 version supplies gripping-force backup during closing. Application-specific fingers establish the contact geometry, while the wedge mechanism synchronizes the jaw movement for the pickup and release sequence.

Problem Solved

Powered parallel closing and closing-direction force backup supply the mechanical action for an external grip, allowing shaped contact fingers to hold the component by its outer faces.

3 mm per jaw Closing force backup Parallel gripping

2. Repeated Component Placement in an Assembly Nest

An assembly station repeatedly brings a held component to a locating nest and needs consistent gripper movement. The HGPT-16-A-B-G2 specifies 0.03 mm repetition accuracy, with hardened-steel jaws and a wedge-shaped drive. Centring sleeves or dowel pins locate the body on its handling attachment, providing a defined mechanical reference while the nest establishes the component’s final position.

Problem Solved

Specified jaw repeatability and located mounting provide consistent mechanical interfaces for repeated placement, helping the handling attachment preserve its relationship with the assembly nest.

0.03 mm repetition Located mounting Hardened-steel jaws

3. Position-Observed Loading and Release

A loading mechanism must coordinate jaw movement with transfer-axis motion and fixture release. The gripper supports proximity-switch position detection so the controller can observe the selected jaw state before advancing the sequence. Documented minimum opening and closing times at 6 bar are 22 ms and 15 ms, characterizing the actuator movement within the complete handling cycle.

Problem Solved

Jaw-position detection supplies feedback for coordinating loading and release, while documented component movement times provide a basis for evaluating the gripper step in the machine sequence.

Proximity-switch detection 22 ms opening 15 ms closing
Select your currency