| Design | For T-slot |
| Approval | RCM; c UL us - Listed (Oil) |
| CE mark (see declaration of conformity) | To EU EMC Directive; In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC; To UK RoHS instructions |
| Certificate issuing authority | UL E232949 |
| Note on materials | RoHS compliant; Free of halogen |
| Instructions on use | https://www.festo.com/Drive-Sensor-Overview |
| Measured variable | Position |
| Measuring principle | Magnetic Hall |
| Sensing range | Up to 52 mm, depending on the drive used |
| Ambient temperature | -40 °C...80 °C |
| Typical sampling interval | 2 ms |
| Max. travel speed | 3 m/s |
| Displacement resolution | 0.02 mm |
| Repetition accuracy | 0.2 mm |
| Analogue output | 0 - 10 V |
| Typical linearity error | ±1 mm |
| Short circuit current rating | Yes |
| Overload protection | Available |
| Output signal | Analogue |
| Operational voltage range DC | 15 V...30 V |
| Residual ripple | 10% |
| No-load supply current | 12 mA |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Cable with plug |
| Electrical connection 1, connector system | M8x1, A-coded, to EN 61076-2-104 |
| Electrical connection 1, number of connections/cores | 4 |
| Electrical connection 1, type of mounting | Screw-type lock; Rotatable |
| Electrical connection 1, compatible type of mounting | Compatible with rotatable/non-rotatable screw-type lock |
| Connection outlet orientation | In-line |
| Material electrical contact | Gold-plated copper alloy |
| Material screw-type lock | Brass, nickel-plated |
| Test conditions cable | Bending strength: to Festo standard; Torsional strength: > 300,000 cycles, ±270°/0.1 m; Energy chain: > 5 million cycles, bending radius 28 mm |
| Cable length | 0.3 m |
| Cable characteristic | Suitable for energy chains/robot applications |
| Cable sheath colour | Grey |
| Material cable sheath | TPE-U(PUR) |
| Type of mounting | Screw-clamped; Insertable in the slot from above |
| Mounting position | Any |
| Physical Weight (kg) | 0.0095 |
| Material housing | Reinforced PA; High-alloy stainless steel |
| Status indication | Red, green LED |
| Ambient temperature with moving cable | -20 °C...70 °C |
| Degree of protection | IP65; IP68 |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Cleanroom suitability, measured according to ISO 14644-14 | Element installed statically, no meaningful evaluation possible according; to ISO 14644-1 |