USD 164.32
18 mm ISO 15407-2 die-cast aluminium sub-base with side ports, external pilot supply, 24 V DC interface, −0.9 to 10 bar range and 192 g weight.
The Festo VABS-S4-2S-G18-R3 is a 18 mm individual valve sub-base based on ISO 15407-2, with G1/8 side connections and an M12 electrical interface. This version uses external pilot-air supply and die-cast aluminium construction. The 192 g base specifies a −0.9 to 10 bar operating range and through-hole mounting.
18 mm ISO 15407-2 individual sub-base with G1/8 side ports, M12 electrical connection and external pilot-air supply.
Mount and connect a compatible 18 mm ISO 15407-2 valve through a G1/8 side-port sub-base with external pilot supply and M12 electrical interface.
| Parameter | Value |
|---|---|
| Construction width | 18 mm |
| Based on standard | ISO 15407-2 |
| Mounting position | Any |
| Pilot air supply | External |
| Operating pressure | -0.09 MPa...1 MPa; -0.9 bar...10 bar |
| Operational voltage range DC | 24 V |
| Immunity to surge | 0.8 kV |
| Current rating at 40° C | 2 A |
| Pollution degree | 3 |
| CE mark (see declaration of conformity) | To EU EMC Directive; To EU Explosion Protection Directive (ATEX); In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC; To UK EX instructions; To UK RoHS instructions |
| Explosion protection certification outside the EU | EPL Gc (GB) |
| Explosion protection | Zone 2 (ATEX); Zone 2 (UKEX) |
| ATEX category gas | II 3G |
| Explosion ignition protection type for gas | Ex ec IIC T3 Gc X |
| explosion group assembly | IIC |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will; always be required) |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Max. surface temperature assembly | T3 |
| Degree of protection | IP65; NEMA 4; In mounted state |
| Ambient temperature | -5 °C...50 °C |
| Physical Weight (kg) | 0.192 |
| Type of mounting | With through-hole; To ISO 15407-2 |
| Note on materials | RoHS compliant |
| Material sub-base | Die-cast aluminium |
| Main pneumatic connection arrangement | G1/8 ports on the side |
| Electrical interface | M12 plug connector |