1. Part-Present Decision on a Sensor-Equipped Gripper
A gripper fitted with a compatible SMH-S1-HG position sensor needs a discrete indication of a taught gripping position. The SVE4 evaluates that position signal and provides PNP switching outputs for the controller. Teach-in establishes the switching points from the actual sensor response, allowing the machine to distinguish a selected gripping position from a different jaw position without a universal analog input module.
Problem Solved
The converter translates the compatible position signal into a discrete control decision, supporting part-present logic based on taught jaw position rather than elapsed actuation time alone.
SMH-S1-HG input
2 PNP outputs
Teach-in
2. Two Position References in an Assembly Sequence
An assembly sequence needs separate indications for two meaningful positions monitored by an SMH-S1-HG sensor. The converter supplies two PNP outputs and freely programmable switching functions, allowing the selected position references to become discrete machine signals. Its four-pin M8 sensor socket and output plug provide defined interfaces between the compatible sensor, converter and controller wiring.
Problem Solved
Two switching outputs expose selected position conditions to the control system, providing separate sequence references without treating the converter as a general-purpose analog measurement transmitter.
Two switching outputs
M8 interfaces
3. Position-Based Sorting of Gripped Components
A handling station distinguishes components whose gripping positions produce different signals at a compatible SMH-S1-HG sensor. Taught switching points and selectable normally open or normally closed functions let the converter express selected position conditions as PNP outputs. The machine uses those conditions for its sorting logic; the underlying sensor and gripping mechanics determine achievable dimensional discrimination.
Problem Solved
Teach-in and selectable switching logic turn position differences into usable sorting inputs, reducing the need for the controller to interpret the compatible sensor signal directly.
Teach-in
Selectable NO/NC
PNP outputs