1. Manual Air Enable for a Workstation
An operator turns the air supply to a pneumatic workstation on or off at the local preparation point. The direct rotary mechanism provides manual 3/2-way switching, with a bistable function that defines two maintained valve states. G1/4 connections and 3000 l/min nominal flow provide the pneumatic interface and component rating for evaluating the workstation branch.
Problem Solved
A maintained manual valve state gives the operator a local supply command for the workstation, without requiring an electrical control connection to switch the air branch.
Manual rotary actuation
3/2 bistable
G1/4 ports
2. Exhaust Selection during Fixture Setup
During a fixture setup change, the operator needs to stop feeding the controlled branch and open its exhaust route. The manual 3/2 valve combines supply switching with an integrated unducted exhaust silencer, allowing that circuit change at the rotary control. Its exhaust-air function cannot be throttled, so the valve provides switching rather than adjustable exhaust metering.
Problem Solved
The manual 3/2 function combines branch supply and exhaust selection in one control, providing a local means to change the pneumatic state during setup.
Manual exhaust selection
Integrated exhaust silencer
Unthrottled exhaust function
3. Local Supply Control for a Manual Air-Blow Task
A workstation uses an air-blow nozzle bank during a manually managed clearing task. The bistable rotary valve provides a local maintained air-flow selection, with G1/4 connections and 3000 l/min nominal flow for assessing the nozzle circuit. Direct manual actuation avoids a pilot-pressure requirement, while the documented operating range extends from 0 to 18 bar.
Problem Solved
A direct manual valve provides a maintained air-feed selection at the workstation, giving the operator a local control point for the nozzle supply branch.
Direct manual actuation
0–18 bar
3000 l/min nominal