Festo 150261 Vacuum Switch, G1/8, Changeover, −0.95 to −0.2 bar

USD 98.28

Pneumatic/electric vacuum switch with adjustable −0.95 to −0.2 bar threshold, changeover contact, Type A plug connection, yellow LED and IP65 protection.

SKU Festo-150261 Category
Festo Pressure Sensors And Vacuum Sensors

Festo VPEV-1/8 Vacuum Switch

BrandFesto
Model IdentifierVPEV-1/8
Official Part Number150261

Technical Overview

The Festo VPEV-1/8 is a pneumatic/electric vacuum switch that evaluates relative pressure through a G1/8 connection. Its vacuum threshold adjusts from −0.95 to −0.2 bar, with a changeover contact supplying the switching interface and a yellow LED indicating the switching state. The pressure-measuring and operating range extends from −1 to 1.6 bar; a separate positive-pressure setting range is specified after conversion. A Type A square plug to DIN 43650 provides the electrical connection. The 240 g aluminium-housed unit supports through-hole mounting in any position, IP65 protection, a maximum switching frequency of 3 Hz and −20 to 80 °C ambient/media conditions.

G1/8 relative-pressure vacuum switch with −0.95 to −0.2 bar adjustable threshold, changeover contact, yellow LED and IP65 protection.

Key Features

  • Pneumatic/electric relative-pressure switching mechanism
  • Vacuum threshold setting range −0.95 to −0.2 bar
  • −1 to 1.6 bar pressure-measuring and operating range
  • Changeover switching contact with yellow LED indication
  • 3 Hz maximum switching frequency
  • 250 V AC and 125 V DC maximum switching-voltage limits; load category governs use
  • 5 A maximum output current; minimum load current specified by voltage
  • Type A square plug to DIN 43650 and G1/8 pneumatic connection
  • 240 g wrought-aluminium housing with silver switch contacts
  • Through-hole mounting in any position; IP65 and −20 to 80 °C ambient/media range

Convert an adjustable vacuum threshold into a changeover contact signal with local yellow-LED indication at the G1/8 connection.

Technical Specification Matrix

ParameterValue
Conforms to standardEN 60947-5-1
ApprovalCCC
CE mark (see declaration of conformity)To EU Low Voltage Directive
UKCA marking (see declaration of conformity)To UK regulations for electrical equipment
Explosion protectionThe information in the certificate must be observed!; Zone 1 (ATEX); Zone 2 (ATEX); Zone 21 (ATEX); Zone 22 (ATEX)
Note on materialsRoHS compliant
Measured variableRelative pressure
Measurement methodPneumatic/electric pressure transducer
Pressure measuring range-0.1 MPa...0.16 MPa; -1 bar...1.6 bar; -14.5 psi...23.2 psi
Operating pressure-0.1 MPa...0.16 MPa; -1 bar...1.6 bar
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Media temperature-20 °C...80 °C
Ambient temperature-20 °C...80 °C
Switching element functionChangeover switch
Max. switching frequency3 Hz
Max. switching output voltage AC250 V
Max. switching output voltage DC125 V
Max. output current5000 mA
Min. load current1 mA at 24 V; 10 mA at 10 V; 100 mA at 5 V
Utilisation category - inductive loadAC-14; DC-13
Utilisation category - resistive loadAC-12; DC-12
Electrical connectionType A; Plug; To DIN 43650; Square design
Type of mountingWith through-hole
Mounting positionAny
Pneumatic connectionG1/8
Physical Weight (kg)0.24
Material housingWrought aluminium alloy
Material switch contactSilver
Switching status indicationYellow LED
Setting range threshold value-0.95 bar...-0.2 bar
Setting range threshold value after conversion0.16 bar...1.6 bar
Degree of protectionIP65
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L

Industrial Applications

1. Vacuum Threshold Confirmation on a Suction Head

A handling station needs a discrete indication that its suction circuit has reached a selected vacuum level. The switch connects through G1/8 and allows a vacuum threshold between −0.95 and −0.2 bar. Its changeover contact supplies the controller interface, while the yellow LED provides a local indication during adjustment and operation of the suction circuit.

Problem Solved

The adjustable threshold turns the measured vacuum condition into a discrete machine signal, supporting sequence decisions based on vacuum level rather than the vacuum-generator command alone.

Adjustable vacuum threshold Changeover contact G1/8

2. Monitoring Vacuum Loss at a Holding Fixture

A vacuum fixture needs an indication when its pressure condition crosses the selected switch threshold during a holding operation. The relative-pressure switch observes the connected circuit and changes its contact state as the threshold condition changes. Its −1 to 1.6 bar operating envelope and 3 Hz maximum switching frequency define the component range for that monitoring task.

Problem Solved

A contact-state change exposes a vacuum-threshold crossing to the machine controller, providing a simple indication of a changed holding-circuit condition without claiming a quantified leakage measurement.

Relative pressure 3 Hz maximum −1 to 1.6 bar

3. Pressure-State Feedback during a Vacuum Release Sequence

A placement station removes vacuum or introduces a release action before moving its handling head away. The changeover switch provides a pressure-state signal as the circuit moves across the adjusted vacuum threshold. The Type A electrical interface and yellow switching LED support integrating that feedback into the release sequence, while the complete circuit determines whether the part has physically separated.

Problem Solved

Pressure-dependent switching supplies feedback about the vacuum-circuit transition during release, helping distinguish the pneumatic condition from the controller command without treating it as direct part-detachment sensing.

Changeover feedback Yellow LED Type A interface
Select your currency