1. Commanded Air Nozzle Supply
A packaging station supplies an air nozzle only during a release or clearing step. The normally closed 3/2-way function provides the commanded pressurization path and an unactuated working-line exhaust state. Its ISO 15218 sub-base working port connects the branch, while 18 l/min nominal flow and 6 ms on/6 ms off component times characterize the selected valve.
Problem Solved
The valve applies air on an electrical command and supplies a defined exhaust routing state afterward, giving the nozzle branch two pneumatic states within the machine sequence.
3/2 normally closed
ISO 15218 sub-base working port
18 l/min
2. Electrical Command for a Pneumatic Pilot Element
An automated fixture uses a downstream pneumatic control element and needs an electrical command stage. The 24 V DC solenoid switches the valve’s working path, with mechanical spring reset providing the alternate valve state. A Type C interface defines the electrical interface, and the valve’s 0–10 bar working range defines the compressed-air condition for the command stage.
Problem Solved
Electrical actuation converts the controller command into pressure-and-exhaust routing for the downstream pilot element, with mechanical spring reset providing the specified alternate switching state.
24 V DC
Mechanical spring reset
0–10 bar
3. Single-Acting Fixture Actuator Control
A small fixture uses a suitable single-acting pneumatic actuator that needs pressure applied during a process step and its line exhausted afterward. This 3/2-way valve supplies those two routing states through an ISO 15218 sub-base working connection. Its 15 mm construction width and sub-base supply/exhaust interfaces organize the valve at the fixture’s pneumatic control station.
Problem Solved
One working port alternates the actuator line between supply and exhaust, while sub-base supply connections provide an organized mounting interface for the fixture’s pneumatic command stage.
Single working port
15 mm width
Sub-base supply/exhaust