1. Metered Travel of a Pneumatic Slide
A pneumatic slide needs a controlled working stroke rather than unrestricted exhaust discharge. Installed in a suitable actuator exhaust path, this valve provides an adjustable restriction through its knurled adjustment screw. The G1/2 connections fit the corresponding circuit connections, and the documented 1620 l/min standard nominal controlled flow characterizes the selected valve size.
Problem Solved
Adjustable exhaust restriction gives the machine builder a local means of setting pneumatic travel behavior, while the knurled screw provides direct manual adjustment.
Exhaust-air metering
1620 l/min nominal
Knurled screw
2. Pneumatic Volume Charging and Reverse Flow
A pneumatic fixture charges a small working volume through an adjustable restriction and subsequently permits air to flow back through the same line. The one-way flow-control function distinguishes the throttled and opposite flow directions. The manufacturer specifies 1620 l/min nominal controlled flow and a separate 2760 l/min opposite-direction nominal rating, characterising the two component flow paths.
Problem Solved
Directional throttling adjusts incoming flow while providing a different reverse-flow path, giving the fixture distinct charging and return-flow behaviour through the same pair of connections.
One-way function
1620 l/min controlled
2760 l/min opposite
3. Accessible Flow Setting on a Machine Bracket
A machine needs a fixed manual restriction setting at a location accessible during setup. Through-hole mounting secures the valve body to a suitable machine bracket, and its knurled screw provides the adjustment interface. Two G1/2 female ports connect the selected branch, with a 0.1–10 bar operating range and 517 g product weight providing concrete installation data.
Problem Solved
A fixed mounting point keeps the manual flow adjustment accessible during setup, allowing the operator to set the directional restriction without repositioning the connected valve body.
Through-hole mounting
Knurled screw
G1/2 ports