Sale!

Festo 4833186 Compact Cylinder, 16 mm Bore, 10 mm Stroke

Original price was: USD 62.66.Current price is: USD 54.34.

Double-acting compact cylinder with elastic cushioning at both ends, M5 ports, 121 N theoretical advance force at 6 bar and proximity-switch detection.

SKU Festo-4833186 Category
Festo Compact Cylinders

Festo DPDM-16-10-PA Compact Cylinder

BrandFesto
Model IdentifierDPDM-16-10-PA
Official Part Number4833186

Technical Overview

The Festo DPDM-16-10-PA is a double-acting compact cylinder with a 16 mm piston diameter, 10 mm stroke and single-ended piston rod. Theoretical advance and return forces are 121 N and 104 N at 6 bar. Elastic cushioning rings or plates act at both ends, while proximity switches support position detection in the machine sequence. M5 ports connect the working lines over a 1.5–8 bar operating range. The cylinder mounts through holes or female threads and uses an anodised aluminium-alloy housing, high-alloy stainless-steel rod and polyurethane seals. Its specified ambient range is −10 to +80 °C, with Class 6 cleanroom suitability.

16 mm bore, 10 mm stroke double-acting compact cylinder with elastic cushioning at both ends, M5 ports and proximity-switch position detection.

Key Features

  • 16 mm piston diameter and 10 mm stroke
  • Double-acting operation with single-ended piston rod
  • 121 N advance and 104 N return theoretical force at 6 bar
  • Elastic cushioning rings or plates at both ends
  • Proximity-switch position detection
  • M5 ports and 1.5–8 bar operating range
  • Through-hole or female-thread mounting
  • Anodised aluminium-alloy housing and high-alloy stainless-steel piston rod
  • Polyurethane seals and −10 to +80 °C ambient range
  • Class 6 cleanroom suitability and CRC 2 corrosion resistance

Provide a 10 mm powered advance and return movement with elastic endpoint cushioning in a compact 16 mm bore pneumatic cylinder.

Technical Specification Matrix

ParameterValue
Stroke10 mm
Piston diameter16 mm
CushioningElastic cushioning rings/plates at both ends
Mounting positionAny
Mode of operationDouble-acting
DesignPiston; Piston rod; Profile barrel
Position detectionVia proximity switch
VariantsPiston rod at one end
Operating pressure0.15 MPa...0.8 MPa; 1.5 bar...8 bar
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B2-L
Cleanroom suitability, measured according to ISO 14644-14Class 6 according to ISO 14644-1
Ambient temperature-10 °C...80 °C
Theoretical force at 0.6 MPa (6 bar, 87 psi)121 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke104 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke121 N
Moving mass for 0 mm stroke18 g
Additional moving mass per 10 mm stroke2.3 g
Reference mass for 0 mm stroke66 g
Incremental mass per 10 mm stroke13 g
Type of mountingEither:; With through-hole; With female thread
Pneumatic connectionM5
Note on materialsRoHS compliant
Material coverWrought aluminium alloy
Material sealsTPE-U(PU)
Material housingAnodised wrought aluminium alloy
Material piston rodHigh-alloy stainless steel

Industrial Applications

1. Compact Component Ejection

An assembly fixture needs to push a released component clear of its nest and retract the attachment for the next cycle. The 10 mm stroke supplies the documented travel, while double-acting operation powers both movements. Theoretical advance and return forces of 121 N and 104 N at 6 bar characterize the two pneumatic actions, with elastic cushioning at the stroke ends.

Problem Solved

Powered movement in both directions provides an advancing ejection action and a positive return stroke, with a defined stroke length and documented theoretical force for the mechanism.

10 mm stroke Double-acting 121 N at 6 bar

2. Position-Confirmed Stop Retraction

A machine retracts a mechanical stop before allowing the next assembly movement. This cylinder supports proximity-switch position detection, giving the controller a means of observing actuator position in the sequence. Elastic cushioning acts at the travel ends, while double-acting operation provides powered movement and the M5 ports connect the pneumatic working lines.

Problem Solved

Proximity-switch compatibility supports position confirmation before the machine proceeds, while double-acting travel provides the pneumatic movement needed to extend and retract the stop.

Proximity-switch detection Elastic cushioning M5 ports

3. Short-Travel Fixture Clamping

An assembly fixture needs a short pneumatic movement to bring a suitable clamping attachment onto a workpiece. The 16 mm piston and 10 mm stroke provide the actuation geometry, with 121 N theoretical advance force at 6 bar. Through-hole or female-thread mounting connects the cylinder to the fixture structure, while the actual clamping force depends on the attachment mechanism and installed pneumatic conditions.

Problem Solved

The compact cylinder supplies a powered clamping movement with documented stroke and theoretical force, giving the fixture a defined actuator basis without assuming a guaranteed workpiece holding load.

10 mm travel 121 N theoretical at 6 bar Through-hole mounting
Select your currency