1. Short-Stroke Component Ejection
An assembly fixture needs to push a released component clear of its nest and then retract the pusher for the next part. The 30 mm stroke provides a defined travel range, while double-acting operation powers both movements. The M16x1.5 rod thread connects a suitable pusher attachment, and the manufacturer specifies 4712 N theoretical advance force at 6 bar for evaluating the ejection task.
Problem Solved
Powered movement in both directions provides an advancing ejection action and a positive return stroke, with a defined stroke length and documented theoretical force for the mechanism.
30 mm stroke
Double-acting
4712 N at 6 bar
2. Position-Confirmed Stop Retraction
A small machine retracts a mechanical stop before allowing the next assembly movement. This cylinder supports proximity-switch position detection, giving the controller a means of observing the actuator position in the sequence. Elastic cushioning rings or plates act at the two travel ends, while the double-acting design provides a powered return instead of relying on an external return spring.
Problem Solved
Proximity-switch compatibility supports position confirmation before the machine proceeds, while double-acting travel provides the pneumatic movement needed to extend and retract the stop.
Proximity-switch detection
Elastic cushioning
G1/8 ports
3. Short-Travel Fixture Clamping
An assembly fixture needs a short pneumatic movement to bring a suitable clamping attachment onto a workpiece. The 100 mm piston and 30 mm stroke provide the actuation geometry, with 4712 N theoretical advance force at 6 bar. Through-hole, female-thread or accessory mounting connects the cylinder to the fixture structure, while the actual clamping force depends on the attachment mechanism and installed pneumatic conditions.
Problem Solved
The compact cylinder supplies a powered clamping movement with documented stroke and theoretical force, giving the fixture a defined actuator basis without assuming a guaranteed workpiece holding load.
30 mm travel
4712 N theoretical at 6 bar
Through-hole mounting