SICK 1049060 WL9-3P2232 PNP Retro-Reflective Sensor

USD 170.56

WL9-3P2232 offers polarized coaxial retro-reflective sensing, 0–3 m PL80A range, single-button teaching, complementary PNP outputs and M8 connection.

SKU SICK-1049060 Category
SICK W9

SICK WL9-3P2232 PNP Coaxial Retro-Reflective Sensor

BrandSICK
Model IdentifierWL9-3P2232
Official Part Number1049060

Technical Overview

The SICK WL9-3P2232 is a polarized retro-reflective photoelectric sensor with coaxial autocollimation optics and complementary PNP outputs. It operates without a minimum reflector distance, with a 0–3 m sensing range and 0–5 m maximum range using a PL80A reflector. A single teach-in button sets the optical working condition. Its visible red 650 nm PinPoint LED produces a 45 mm spot at 1.5 m. Response is below 0.5 ms with resistive load, and switching frequency is 1,000 Hz at a 1:1 light/dark ratio. The 10–30 V DC device has an M8 four-pin male connector, VISTAL housing, PMMA optics and IP66/IP67/IP69K protection.

Polarized coaxial retro-reflective sensor with 0–3 m PL80A sensing range, single-button teaching, complementary PNP outputs and M8 four-pin connection.

Key Features

  • Coaxial/autocollimation retro-reflective optics
  • No minimum reflector distance
  • 0–3 m sensing range with PL80A reflector
  • 0–5 m maximum range with PL80A reflector
  • 650 nm visible red PinPoint LED; Ø 45 mm at 1.5 m
  • Complementary PNP light/dark outputs
  • Response < 0.5 ms; 1,000 Hz switching
  • M8 4-pin connector; M3 mounting holes
  • Single teach-in button; polarization filter
  • VISTAL housing with IP66/IP67/IP69K protection

Use coaxial optics to place the reflector close to the sensor while keeping electrical wiring on one side of the machine.

Technical Specification Matrix

ParameterValue
Functional principlePhotoelectric retro-reflective sensor with autocollimation/coaxial optics; no minimum reflector distance
Sensing range0–3 m with PL80A reflector
Maximum sensing range0–5 m with PL80A reflector
Light sourcePinPoint LED, visible red light
Wavelength650 nm
Light spot sizeØ 45 mm at 1.5 m
AdjustmentSingle teach-in button
MountingM3 mounting holes
Power supply10–30 V DC; short-circuit-protected network, max. 8 A
Residual ripple< 5 Vpp; remain within supply-voltage limits
Current consumption30 mA without load
Switching outputPNP, complementary
Switching modeLight/dark switching; Q = light switching
Output current≤ 100 mA; maximum 50 mA at ambient temperature ≥ 50 °C
Response time< 0.5 ms with resistive load
Switching frequency1,000 Hz at light/dark ratio 1:1
ConnectionMale connector M8, 4-pin
Circuit protectionSupply/input/output reverse-polarity protection and interference suppression
Protection classIII
Housing formRectangular
Housing materialVISTAL plastic
Optics materialPMMA plastic
IP ratingIP66, IP67 and IP69K
Operating temperature−40 to +60 °C
Storage temperature−40 to +75 °C
UL fileNRKH.E181493
MTTFD1,668 years
Diagnostic coverage DCavg0%
Mission time20 years
Polarization filterYes
LED service lifeAverage 100,000 h at +25 °C ambient
Pin assignment1 BN=L+; 2 WH=Q complement; 3 BU=M; 4 BK=Q (light switching), CD-084
Physical Weight (kg)0.013

Industrial Applications

1. Counting separated opaque cartons

A carton conveyor can place the sensor on one side and a passive reflector on the other. Each opaque carton interrupts the returned red beam, producing a PNP switching event for the counter. Retro-reflective sensing provides the optical path, while the 1,000 Hz switching frequency supports repeated transitions within the specified timing limits.

Problem Solved

The reflector needs no electrical supply, reducing wiring across the conveyor while the machine receives a discrete event for each separated carton that interrupts the beam.

Retro-reflective PNP 1,000 Hz

2. Monitoring accumulation at a transfer point

At a conveyor transfer, a load that remains between the sensor and reflector holds the received-light signal in the blocked state. The machine controller can use this duration to identify sustained occupancy and regulate upstream release. Complementary PNP outputs provide light and dark switching signals, while the M8 4-pin connector connects the sensor to local machine wiring.

Problem Solved

A sustained beam blockage identifies a transfer position that remains occupied, helping the controller coordinate upstream feeding before additional loads enter the same constrained space.

Complementary PNP M8 4-pin connector Beam interruption

3. Checking opaque sheet continuity

An opaque sheet feeder can direct the returned beam through the expected material path. The sensor detects whether the material continues to block that path, and an opening caused by runout or a break changes its switching state. IP67 protection suits exposed machine mounting, while the visible red beam assists positioning during initial setup.

Problem Solved

A change in the received-light state gives the controller an electrical indication of missing material at the monitoring position, supporting an orderly response to interrupted feed.

IP67 Visible red light Material continuity
Select your currency