| Functional principle | Photoelectric proximity sensor; background suppression with V-optics |
| Sensing range | 2–50 mm on 90% remission reference white, DIN 5033 |
| Adjustable background-suppression threshold | 15–50 mm |
| Recommended sensing range | 15–30 mm for best performance |
| Minimum background separation | 1 mm at 21 mm distance; black 6% target / white 90% background |
| Light source | Visible red PinPoint LED; 635 nm |
| Light spot size | Rectangular 0.5 × 1.9 mm at 30 mm |
| Squint angle | <±1.5° at TU = +23 °C |
| LED risk group | Free group; EN 62471:2008-09 and IEC 62471:2006, modified |
| Average LED service life | 100,000 h at Ta = +25 °C |
| Smallest detectable object | Typical 0.1 mm at 30 mm on 90% remission reference white, DIN 5033 |
| Adjustment | BluePilot Teach-Turn for sensing range; IO-Link for sensor parameters and Smart Task |
| Indication | Blue=range indicator; green steady=power, flashing=IO-Link; yellow steady=object present, off=object absent |
| Manufacturer special application | Detecting transparent objects |
| Communication interface | IO-Link V1.1; COM2, 38.4 kBaud |
| IO-Link cycle time | 2.3 ms |
| Process data length | 16 bit |
| Process data structure | Bit 0=QL1; bit 1=QL2; bits 2–15=current receiver level, live |
| IO-Link identifiers | VendorID 26; DeviceID 0x8002EA / 8389354 |
| Compatible master port | Type A |
| SIO mode | Supported |
| Power supply | 10–30 V DC, limit values |
| Ripple | ≤5 Vpp |
| Usage category | DC-12 and DC-13; EN 60947-5-2 |
| Current consumption | ≤25 mA without load at 24 V DC |
| Protection class | III |
| Digital output | One push-pull PNP/NPN output; current ≤100 mA |
| Switching mode | Light switching preset; object present → QL1 HIGH |
| Signal voltage PNP HIGH/LOW | Approximately UB−2.5 V / 0 V |
| Signal voltage NPN HIGH/LOW | Approximately UB / <2.5 V |
| Output protection | Reverse polarity, overcurrent and short circuit |
| Standard response time | ≤500 µs; use Smart Task timing when enabled |
| Standard response repeatability | 150 µs; signal transit time with resistive load in switching mode |
| Standard switching frequency | 1,000 Hz at 1:1 light/dark ratio; Smart Task limits differ |
| Pin assignment | 1 BN=L+; 2 WH=MF, initially inactive; 3 BU=M; 4 BK=QL1/C; pin functions configurable via IO-Link; do not connect switching output to another output |
| Connection | Cable with four-pin M12 male plug; manufacturer connection length 182 mm |
| Cable length L | 140 mm; connector length 42 mm in drawing |
| Cable material | PVC; do not bend below 0 °C |
| Conductor cross-section | 0.14 mm² |
| Cable diameter | 3.4 mm |
| Housing design | Rectangular, flat |
| Housing material | VISTAL plastic |
| Front screen material | PMMA plastic |
| Male connector material | VISTAL plastic |
| Maximum fixing-screw torque | 0.4 Nm |
| Mounting holes | M3 |
| IP rating | IP66 / IP67, EN 60529 |
| Operating temperature | −40 to +60 °C |
| Storage temperature | −40 to +75 °C |
| Typical ambient light immunity | Artificial light and sunlight ≤50,000 lx |
| Shock resistance | 30 g, 11 ms; three positive and three negative shocks on each X/Y/Z axis, 18 total; EN 60068-2-27 |
| Vibration resistance | 10–1,000 Hz; 1 mm amplitude; 3 × 30 min; EN 60068-2-6 |
| Relative humidity | 35–95%, non-condensing |
| EMC | EN 60947-5-2 |
| Cleaning-agent resistance | ECOLAB |
| UL files | NRKH.E181493 and NRKH7.E181493 |
| Smart Task | Base logics: Direct, AND, OR; inverter available |
| Smart Task timers | Deactivated; switch-on delay; off delay; ON and OFF delay; impulse/one shot |
| Smart Task frequency | SIO Logic 900 Hz without IO-Link communication; IOL 800 Hz with IO-Link communication |
| Smart Task response time | SIO Logic 550 µs; IOL 600 µs |
| Smart Task response repeatability | SIO Logic 200 µs; IOL 250 µs |
| Diagnostic data | Qualitative device temperature: very cold/cold/moderate/warm/hot; device and detailed status; operating-hour counters including resettable counter; quality of teach |
| High-gloss installation example | At set range x=30 mm: β −7° to +7°; α −12° to +5°; follow manufacturer angle diagrams |
| Glass-pane installation example | Transparent pane before 18% remission background, set range x=30 mm and object-to-background d≥200 mm: β −6° to +6°; α −4° to +7° |
| MTTFD | 1,439 years |
| DCavg | 0% |
| Mission time | 20 years |
| Physical Weight (kg) | 0.03 |