Contact Us:
sales@inosaki.com

PLC-OPT-220DC/300DC/1 – 2900387 – Solid-state Relay Module – Phoenix Contact Solid-state Relays And Electromechanical Relays

$ 678.50

Phoenix Contact develops terminal blocks, power supplies, relays, connectors, signal conditioners, controllers & PLCs, I/O systems, Industrial Ethernet, controller system cabling, PCB terminal blocks & connectors, and surge suppression.

Commercial Data

Item number 2900387
Packing unit 10 pc
Minimum order quantity 1 pc
Product key DK62A3
Catalog page Page 408 (C-5-2019)
GTIN 4046356506908
Weight per piece (including packing) 31.59 g
Weight per piece (excluding packing) 32.33 g
Customs tariff number 85364900
Country of origin DE

Product Properties

Product type Solid-state relay module
Product family PLC-INTERFACE
Application With integrated solid-state relay
Operating mode 100% operating factor
Insulation characteristics: Standards/regulations
Insulation Basic insulation
Overvoltage category III
Pollution degree 2
Data management status
Date of last data management 20.03.2025

Electrical Properties

Maximum power dissipation for nominal condition 1.23 W
Standards/regulations
Rated insulation voltage 300 V
Rated surge voltage 2.5 kV

Input Data

Nominal input voltage UN 220 V DC
Input voltage range in reference to UN 0.8 … 1.2
Input voltage range 176 V DC … 264 V DC
Switching threshold “0” signal in reference to UN ≤ 0.4
Switching threshold “1” signal in reference to UN ≥ 0.8
Typical input current at UN 3 mA
Typical response time 0.4 ms
Typical turn-off time 1.4 ms
Operating voltage display Yellow LED
Protective circuit Reverse polarity protection; Polarity protection diode
Surge protection; Varistor
Transmission frequency 50 Hz

Output Data

Designation Output data
Contact switching type 1 N/O contact
Design of digital output electronic
Output voltage range 12 V DC … 300 V DC (Partition plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal points in adjacent modules. Potential bridging is then carried out with FBST 8-PLC… or …FBST 500…)
Limiting continuous current 1 A (see derating curve)
Voltage drop at max. limiting continuous current < 500 mV
Protective circuit Reverse polarity protection; Polarity protection diode
Surge protection; Varistor

Connection Data

Connection method Push-in connection
Stripping length 10 mm
Conductor cross section rigid 0.14 mm² … 2.5 mm²
Conductor cross section flexible 0.14 mm² … 2.5 mm²
0.2 mm² … 2.5 mm² (Single ferrule)
2x 0.5 mm² … 1 mm² (TWIN ferrule)
Conductor cross section AWG 26 … 14

Dimensions

Width 6.2 mm
Height 80 mm
Depth 94 mm

Material Specifications

Color gray (RAL 7042)
Flammability rating according to UL 94 V0 (Housing)

Environmental and real-life conditions 

Ambient conditions
Ambient temperature (operation) -25 °C … 60 °C
Ambient temperature (storage/transport) -40 °C … 85 °C

Standards And Regulations

Standards/regulations
Standards/regulations IEC 60947-5-1

Approvals

CE
Certificate CE-compliant
UKCA
Certificate UKCA-compliant
Shipbuilding approval
Certificate TAE0000196
Corrosive gas test
Identification ISA-S71.04. G3 Harsh Group
EN 60068-2-60
Shipbuilding data
Temperature D
Humidity A
Vibration B/C
EMC B
Enclosure Required protection according to the Rules shall be provided upon installation on board

EMC Data

Electromagnetic compatibility Conformance with EMC directive
Low Voltage Directive Conformance with Low Voltage Directive

Mounting

Mounting type DIN rail mounting
Assembly note in rows with zero spacing
Mounting position any

 

Additional information

Weight N/A
MOQ(pcs)

Related Products

SIEMENS_SIMATIC S7-300_CPU317F-2 PN DP
camera-gige-ueye-se-cmos-rev4-1
IDS_camera_UI-5240SE Rev
Festo_Pneumatic tubes_PUN-V0-8X125-RT_525451_1
MOXA_General Device Servers_MOXA NPort 5130
PB8 10 16-01 020304
Select your currency