1. Counting opaque loads between conveyor rails
A conveyor can mount the sender and receiver on opposite sides of separated opaque loads and feed PNP transitions into an external counter. The direct beam avoids reliance on light reflected by the package surface. Commissioning checks alignment, target coverage and spacing against the response below 0.5 ms, 1,000 Hz switching rating and installed sensing distance.
Problem Solved
Direct-beam interruptions give external counting electronics load-passage events, helping count separated opaque packages using an opposed sender and receiver arrangement.
Load count
Direct beam
Complementary PNP
2. Monitoring a break in an opaque material feed
A strip or sheet feeder can place the direct beam across a normally occupied material location. A break or exhausted feed clears the path and changes the complementary PNP states. External control times that clear condition and distinguishes sustained material loss from planned gaps, while the green power and yellow received-light indicators assist setup of the opposed optical heads.
Problem Solved
A sustained clear-path state gives external feeder monitoring a material-continuity reference, helping identify missing material before the next process step proceeds without the intended strip or sheet.
Material continuity
Clear-path timing
Local indication
3. Checking the sender and receiver signal chain
An external diagnostic routine can command the documented sender-off test function and observe the receiver’s complementary outputs. Suppressing emitted light provides a controlled optical-state change without inserting a load into the beam. The controller compares the resulting states with its expected sequence and records the observation as a process diagnostic. This provides an observation of the optical and electrical response during the commanded test sequence.
Problem Solved
A controlled sender-off event gives external diagnostics a repeatable signal-chain observation, helping check optical response without requiring a physical target passage.
Sender-off check
External diagnostics
Complementary states