1. Counting separated opaque packages on a conveyor
A conveyor can place the sensor opposite the supplied P250 reflector and pass separated opaque packages through the returned-light path. The P250 sensing range is 0.05–4.5 m, with a separately listed 0.05–6 m maximum range. External counting logic evaluates PNP light-switching transitions, while commissioning verifies optical coverage and package spacing against the 0.5 ms response and 1,000 Hz rating.
Problem Solved
An interrupted returned-light path gives external counting logic package-passage events, helping register separated opaque loads using the sensor’s integrated receiver and supplied reflector.
Package count
P250 reflector
PNP light switching
2. Monitoring continuity of an opaque material feed
A feeder can place the reflector path across a location normally covered by an opaque strip or sheet. A break or exhausted feed clears the returned-light path and changes the PNP light-switching condition. The sensitivity potentiometer sets the optical response, while external monitoring distinguishes persistent material loss from intended gaps and verifies sufficient coverage at the chosen sensor-to-reflector distance.
Problem Solved
A sustained change in the returned-light condition gives external feed monitoring a continuity reference, helping identify missing material before a dependent machine operation proceeds.
Material continuity
Sensitivity setting
Opaque feed
3. Timing occupancy at a conveyor discharge
A conveyor discharge can place the returned-light path across the load receiving point and time how long an opaque package interrupts it. External control compares sustained blockage with the expected passage interval. Installation respects the selected reflector’s minimum distance and usable range, while the orange output and green signal-strength indicators provide local context when aligning and checking the optical path.
Problem Solved
Timing a blocked optical path gives external discharge control an occupancy reference, helping recognize a load that remains in place before another package is released.
Discharge occupancy
External timing
Optical alignment