SICK 1071205 IME08-06NPOZW2S M8 PNP NC Inductive Sensor

USD 65.78

IME08-06NPOZW2S offers 6 mm nominal and 4.86 mm assured inductive range, non-flush M8 mounting, PNP normally closed output and a 2 m PVC cable.

SKU SICK-1071205 Category
SICK IME

SICK IME08-06NPOZW2S M8 PNP NC Inductive Sensor

BrandSICK
Model IdentifierIME08-06NPOZW2S
Official Part Number1071205

Technical Overview

The SICK IME08-06NPOZW2S is a non-flush M8 × 1 inductive proximity sensor with triple sensing range. Its 6 mm nominal range and 4.86 mm assured range provide the documented distance references, with reduction factors for different target metals. The PNP normally closed output uses DC three-wire wiring and supports 500 Hz switching. A 2 m three-wire PVC cable connects the 10–30 V DC sensor to external control. The nickel-plated brass housing has a PA66 sensing face, IP67 protection, 52 mm housing length and 30 mm thread length. Two nickel-plated brass mounting nuts are supplied. Operating and storage temperatures both span −25 to +75 °C.

Non-flush M8 triple-range inductive sensor with 6 mm nominal range, 4.86 mm assured range, PNP normally closed output and 2 m PVC cable.

Key Features

  • Standard-design M8 × 1 housing for non-flush installation
  • Triple sensing range: 6 mm nominal; 4.86 mm assured
  • PNP normally closed output; DC three-wire circuit
  • 500 Hz switching frequency; availability delay ≤50 ms
  • 2 m three-wire PVC cable; 0.25 mm² conductors and Ø3.9 mm cable
  • 10–30 V DC; output current ≤200 mA; no-load current ≤10 mA
  • Short-circuit protection and power-up pulse protection
  • Nickel-plated brass housing and PA66 sensing face; IP67
  • 52 mm housing length; 30 mm thread; maximum tightening torque ≤5 Nm
  • Two nickel-plated brass mounting nuts; −25 to +75 °C operation and storage

Use the extended inductive range and PNP normally closed signal to monitor a metal target beside a non-flush M8 sensing face.

Technical Specification Matrix

ParameterValue
Functional principleInductive proximity sensor
Special featureTriple sensing range
Housing designMetric standard design
Mounting threadM8 × 1; Ø8 mm
InstallationNon-flush
Nominal sensing range Sn6 mm
Assured sensing range Sa4.86 mm
Switching frequency500 Hz
Switching outputPNP; normally closed
Electrical circuitDC three-wire
Connection2 m three-wire PVC cable
Conductor cross-section0.25 mm²
Cable diameterØ3.9 mm
Conductor functionsCD-003: BN=L+; BK=NC; BU=M
Power supply10–30 V DC
Ripple≤10%
Voltage drop≤2 V at maximum continuous output current
Availability delay≤50 ms
Hysteresis1–15%
Reproducibility≤5% of Sr with constant supply voltage and ambient temperature
Temperature drift±10% of Sr
EMCEN 60947-5-2
Continuous output current≤200 mA
No-load current≤10 mA
Circuit protectionShort-circuit protection; power-up pulse protection
Shock resistance30 g, 11 ms
Vibration resistance10–55 Hz, 1 mm
Operating temperature−25 to +75 °C
Storage temperature−25 to +75 °C
Housing materialNickel-plated brass
Sensing face materialPA66 plastic
Housing length52 mm
Thread length30 mm
Maximum tightening torque≤5 Nm
Items suppliedTwo nickel-plated brass mounting nuts
IP ratingIP67 to EN 60529
UL fileNRKH.E181493
MTTFD1,735 years
DCavg0%
Material reduction factorsReference values, may vary: St37 steel 1; stainless steel V2A/304 approximately 0.68; aluminum approximately 0.45; copper approximately 0.39; brass approximately 0.49
Installation spacingA=16 mm; B=30 mm; C=8 mm; D=18 mm; E=10 mm; F=60 mm; apply manufacturer non-flush installation diagram

Industrial Applications

1. Checking the position of a metal fixture target

An assembly fixture can present a metal reference target beside the non-flush sensing face and read its PNP normally closed signal after seating. The 4.86 mm assured range provides the documented range reference. Setup accounts for actual gap, target material and installation clearances so the seated and withdrawn positions produce distinguishable input states.

Problem Solved

A metal-target position reference helps external fixture sequencing distinguish the seated mechanism from its withdrawn position, using the documented normally closed output behavior for input interpretation.

Fixture position Non-flush M8 PNP NC

2. Counting separated metal parts on a feed track

A feed track can move separated metal parts through the inductive sensing zone and send transitions to an external counter. The 500 Hz switching specification provides the timing basis, and external logic interprets the normally closed output accordingly. Commissioning checks part size, target-material reduction, speed and spacing to establish a distinct event for each part.

Problem Solved

Distinct inductive transitions give external counting logic passage events for suitably presented metal parts, helping track feed quantity independently of reflected-light differences between their surfaces.

Metal part count 500 Hz NC transitions

3. Timing the return of a metal reference flag

A cyclic mechanism can carry a metal reference flag past the sensor when it returns to a defined position. External monitoring compares the PNP normally closed transition with the expected sequence interval and identifies a missing or late event. Setup maintains the required non-flush clearances and checks the installed gap against the target-specific sensing behavior.

Problem Solved

A timed metal-reference event helps external monitoring distinguish ordinary cycle return from a stalled or delayed mechanism, using the installed sensing position as its process reference.

Return event Sequence timing Metal reference
Select your currency