SICK 1060534 DBS36E-BBEK01024 1,024 PPR HTL Hollow-Shaft Encoder

USD 120.90

DBS36E-BBEK01024 offers 1,024 PPR, six HTL push-pull channels, a front-clamped 8 mm blind hollow shaft, 7–30 V supply and a 1.5 m PVC cable.

SKU SICK-1060534 Category
SICK Encoders

SICK DBS36E-BBEK01024 1,024 PPR HTL Hollow-Shaft Encoder

BrandSICK
Model IdentifierDBS36E-BBEK01024
Official Part Number1060534

Technical Overview

The SICK DBS36E-BBEK01024 is an incremental encoder with 1,024 pulses per revolution and a fixed HTL push-pull interface. Its front-clamped 8 mm blind hollow shaft fits the driven shaft, with a documented engagement range of 6–21 mm. Six output channels carry A, B and Z signals with their complements, and one 90° electrical index is logically gated with A and B. The universal 1.5 m eight-wire PVC cable connects to a 7–30 V DC supply. Initialization takes less than 3 ms and output frequency is limited to 300 kHz. Specified operating speed is 6,000 min⁻¹; the 8,000 min⁻¹ maximum permits no permanent operation and decreases signal quality. Aluminum housing and flange provide IP65 protection.

1,024 PPR fixed-HTL incremental encoder with six channels, a front-clamped 8 mm blind hollow shaft, 7–30 V supply and 1.5 m eight-wire PVC cable.

Key Features

  • 1,024 pulses per revolution; incremental HTL push-pull interface
  • Six channels: A, B, Z and complementary signals
  • One index per revolution, 90° electrical gated with A and B
  • 8 mm blind hollow shaft; front clamp; shaft engagement 6–21 mm
  • 1.5 m universal eight-wire PVC cable; 7–30 V DC supply
  • Initialization <3 ms; output frequency ≤300 kHz; load current ≤30 mA
  • Power consumption ≤0.5 W without load; reverse-polarity and conditional output short-circuit protection
  • Operating speed 6,000 min⁻¹ with self-heating considered; ≤8,000 min⁻¹ for non-permanent operation with reduced signal quality
  • Stainless steel shaft; aluminum flange and housing; IP65
  • Ambient operation −20 to +85 °C; 90% relative humidity without condensation

Obtain six-channel HTL incremental feedback through an integral PVC cable from a front-clamped 8 mm blind hollow shaft.

Technical Specification Matrix

ParameterValue
Functional principleIncremental rotary encoder
Pulses per revolution1,024
Measuring step90° electrical / pulses per revolution
Measuring-step deviation±18° / pulses per revolution
Error limits±54° / pulses per revolution
Electrical interfaceHTL push-pull
Output channelsSix: A, inverted A, B, inverted B, Z, inverted Z
Reference signalOne per revolution; 90° electrical, logically gated with A and B
Initialization time<3 ms
Output frequency≤300 kHz
Load current≤30 mA
Power consumption≤0.5 W without load
ConnectionUniversal 1.5 m eight-wire PVC cable
Power supply7–30 V DC
Reverse-polarity protectionYes
Short-circuit protectionOutputs protected only with Us and GND correctly connected
Shaft8 mm blind hollow shaft; front clamp
Shaft engagementMinimum 6 mm; maximum 21 mm
Optional collets5 mm and 6 mm collets ordered separately; no collet required for an 8 mm shaft
Shaft materialStainless steel
Flange materialAluminum
Housing materialAluminum
Starting torque0.5 Ncm at +20 °C
Operating torque0.4 Ncm at +20 °C
Static shaft displacementRadial ±0.3 mm; axial ±0.5 mm; greater values reduce bearing lifetime
Dynamic shaft displacementRadial ±0.1 mm; axial ±0.2 mm; greater values reduce bearing lifetime
Operating speed6,000 min⁻¹; allow self-heating of 4.7 K per 1,000 min⁻¹
Maximum operating speed≤8,000 min⁻¹; no permanent operation; signal quality decreases
Moment of inertia0.8 gcm²
Bearing lifetime2 × 10⁹ revolutions
Angular acceleration≤500,000 rad/s²
EMCEN 61000-6-2 and EN 61000-6-3, class A
IP ratingIP65
Relative humidity90%; condensation not permitted
Operating temperature−20 to +85 °C
Storage temperature−40 to +100 °C, unpacked
Shock resistance100 g, 6 ms; EN 60068-2-27
Vibration resistance20 g, 10–2,000 Hz; EN 60068-2-6
Wire functionsBN=inverted A; WH=A; BK=inverted B; PK=B; YE=inverted Z; VT=Z; BU=GND; RD=Us
Shaft clamping screwsTwo M3 set screws, hexagon socket SW1.5
Mounting holesFour M2.5 screws on Ø30 mm pitch circle
MTTFD600 years; standard product, not a safety component; nominal component load, average ambient 40 °C, 8,760 h/year
Physical Weight (kg)0.15

Industrial Applications

1. Measuring travel through a driven feed shaft

A material feeder can mechanically couple the encoder to its drive shaft and evaluate A/B transitions with an external counter. The controller converts incremental revolutions into travel using the installed drive ratio and 1,024 pulses per revolution. Commissioning checks slip, coupling alignment and electrical input compatibility before using the counts as a feed-distance reference.

Problem Solved

Incremental shaft feedback gives external feed-control logic a travel reference related to the installed drive geometry, helping track material advance through the selected mechanical ratio.

Feed travel 1,024 PPR A/B transitions

2. Monitoring shaft speed from incremental pulse timing

A drive-monitoring controller can calculate rotational speed from incremental pulse frequency and the known 1,024 pulses per revolution. The HTL push-pull interface connects to a compatible counting input. Setup checks input frequency capability and the separate electrical and mechanical encoder limits, including speed-related self-heating, before comparing measured speed with the expected operating pattern.

Problem Solved

Frequency-derived rotational feedback helps external monitoring identify changes in drive behavior, using the known pulse count and compatible input timing as its calculation basis.

Speed monitoring HTL push-pull Pulse frequency

3. Referencing a repeating rotary-machine cycle

A rotary machine can use the encoder Z signal as a repeating reference alongside incremental A/B counts. One index signal per revolution is logically gated with A and B at 90° electrical. External sequencing establishes the installed relationship between that reference and the machine tooling so it can relate counted movement to the intended cycle.

Problem Solved

A once-per-revolution index provides external sequencing with a recurring rotational reference, helping relate incremental counts to the selected tooling cycle after the mechanical setup is established.

Index reference Rotary cycle A/B gating
Select your currency