1. Confirming the seated position of a metal clamp
A machining fixture can present a metal clamp target to the flush sensing face at a repeatable seated gap. The PNP normally-closed output changes state as the target enters the inductive field. External sequencing evaluates that polarity after the clamp settles, using the nominal and assured sensing ranges and the relevant material reduction factor to establish the installed target gap.
Problem Solved
A contactless metal-target condition gives external fixture sequencing a clamp-position reference, helping distinguish the seated target from the open position without mechanical contact at the sensing face.
Clamp position
PNP normally closed
Flush installation
2. Counting separated metal lugs on a feed mechanism
A feed mechanism can move separated steel lugs past the sensor at a controlled gap. Each entry and exit changes the PNP normally-closed state for an external counter. The 1,000 Hz switching rating and documented hysteresis inform the event timing, while commissioning includes lug width, spacing, movement speed, target material and the controller sampling interval.
Problem Solved
Repeated inductive transitions give external counting logic a metal-lug passage event, helping track mechanical feed cycles at a fixed observation point without contacting the moving targets.
Metal-lug count
1,000 Hz
External counter
3. Monitoring repeated return timing of a metal carriage
A machine can mount the sensor flush beside a metal carriage return position and timestamp the normally-closed transitions in its controller. External monitoring compares successive return intervals with the expected process timing and identifies a delayed or absent return. Stable mounting and the specified reproducibility under constant supply and ambient temperature support a consistent observation point.
Problem Solved
Repeated metal-target position events provide external monitoring with a return-time reference, helping identify a carriage movement that falls outside the established process interval.
Return timing
Position events
Reproducibility