SICK 1069072 GRL18S-P2436 PNP M18 Retro-reflective Sensor

USD 50.44

Polarized dual-lens sensing over 0.06–6 m with PL80A, complementary PNP outputs, fixed sensitivity, M12 four-pin connection and an IP67 ABS housing.

SKU SICK-1069072 Category
SICK GR18S

SICK GRL18S-P2436 PNP M18 Retro-reflective Sensor

BrandSICK
Model IdentifierGRL18S-P2436
Official Part Number1069072

Technical Overview

The SICK GRL18S-P2436 is a polarized photoelectric retro-reflective sensor with dual-lens optics and an axial M18 × 1 threaded plastic body. It operates with a reflector, providing a 0.06–6 m sensing range and 0.03–7.2 m maximum range with PL80A. Its fixed sensitivity requires no adjustment, and the 650 nm PinPoint LED produces a 175 mm spot at 7 m. Complementary PNP outputs deliver light/dark signals through an M12 four-pin male connector, with response below 500 µs and a 1,000 Hz switching rating. The ABS housing and PMMA optics provide IP67 protection. Two fastening nuts are supplied, and the specified output-current and operating-temperature conditions govern electrical loading.

Fixed-sensitivity polarized M18 retro-reflective sensor with complementary PNP outputs, 0.06–6 m PL80A sensing, 1,000 Hz switching and M12 four-pin connection.

Key Features

  • Polarized dual-lens retro-reflective sensing with a minimum reflector distance
  • 0.06–6 m sensing and 0.03–7.2 m maximum range with PL80A
  • 650 nm visible red PinPoint LED; Ø175 mm spot at 7 m
  • Fixed sensitivity; no adjustment
  • Complementary PNP light/dark outputs on separate pins
  • Response <500 µs with resistive load; 1,000 Hz at 1:1 light/dark ratio
  • Output current ≤100 mA; maximum 50 mA above 24 V supply or +49 °C ambient
  • Axial M18 × 1 ABS housing; M12 four-pin male connector
  • PMMA optics; IP67; two fastening nuts supplied
  • Green power indicator and yellow received-light indicator

Obtain complementary PNP passage signals from a fixed-sensitivity polarized reflector beam in an axial M18 threaded sensor.

Technical Specification Matrix

ParameterValue
Functional principlePolarized photoelectric retro-reflective sensor
Optical arrangementDual-lens system with minimum distance to reflector; axial optical axis
Sensing range0.06–6 m with PL80A reflector
Maximum sensing range0.03–7.2 m with PL80A reflector
Secondary reflector rangesPL40A: sensing 0.06–5.2 m, maximum 0.03–6.2 m; PL20A: sensing 0.06–2.9 m, maximum 0.03–3.8 m; P250: sensing 0.06–5.4 m, maximum 0.03–6.4 m; PL22: sensing 0.06–1.9 m, maximum 0.03–2.2 m; REF-Plus 3436: sensing 0.08–1.6 m, maximum 0.06–2.0 m
Light sourceVisible red PinPoint LED; 650 nm
Average LED service life100,000 h at ambient +25 °C
Light spot sizeØ175 mm at 7 m; Ø75 mm at 3 m; Ø25 mm at 1 m; Ø8 mm at 0.2 m
Polarization filterProvided
AdjustmentNone; fixed sensitivity
Switching outputsComplementary PNP outputs
Switching modeLight/dark switching on separate outputs
Pin assignmentCD-084: 1 BN=L+; 2 WH=Q̅; 3 BU=M; 4 BK=Q
Response time<500 µs signal transit time with resistive load
Switching frequency1,000 Hz at 1:1 light/dark ratio
Output current≤100 mA; maximum 50 mA when supply exceeds 24 V or ambient exceeds +49 °C
Power supply10–30 V DC; short-circuit-protected network, maximum 8 A
Ripple<5 Vpp; remain within supply-voltage tolerances
Current consumption30 mA
Circuit protectionSupply and input/output reverse-polarity protection; output overcurrent and short-circuit protection
Protection classIII
ConnectionM12 four-pin male connector
Housing designCylindrical with axial optical axis
Mounting threadM18 × 1
Housing materialABS plastic
Optics materialPMMA plastic
Nominal axial length38.1 mm
Items suppliedTwo fastening nuts
IndicationGreen steady: power on; yellow steady: object absent; yellow off: object present
IP ratingIP67
Operating temperature−25 to +55 °C at supply ≤24 V and output current <50 mA
Storage temperature−40 to +70 °C
EMCEN 60947-5-2
UL filesNRKH.E348498 and NRKH7.E348498
MTTFD2,686 years
DCavg0%

Industrial Applications

1. Counting separated cartons across a conveyor

A conveyor can place the sensor opposite a PL80A reflector and route separated opaque cartons through the beam. The polarized dual-lens configuration supplies complementary PNP transitions to an external counter, with the 0.06–6 m sensing range defining the stated reflector separation. Target coverage, spacing and controller sampling use the documented spot sizes, response below 500 µs and 1,000 Hz switching basis.

Problem Solved

Beam interruption gives an external counter discrete carton-passage events, helping track separated loads through a fixed optical station using complementary PNP signal states.

Carton counting Complementary PNP 1,000 Hz

2. Registering a material edge for indexed feed

An indexed feeder can guide opaque strip material across the reflector beam so a cut edge or opening changes received light at a defined position. Fixed sensitivity removes a local adjustment step, while the two PNP output polarities let external indexing logic read the required event. The installed geometry keeps the reflector beyond the minimum distance and presents an opening large enough to clear the actual light spot.

Problem Solved

A defined light-to-dark transition provides external indexing logic with a material-edge reference, helping coordinate the next feed step with the strip’s presented position.

Material indexing Fixed sensitivity Light/dark outputs

3. Detecting retained occupancy at a transfer point

A transfer station can position the reflector beam across a handover location and monitor how long an opaque load interrupts it. External sequencing times the PNP state to distinguish a brief passage from sustained occupancy and holds the upstream release when a load remains. The M18 thread and supplied nuts support a fixed axial mounting position, with local LEDs assisting observation during commissioning.

Problem Solved

A sustained interruption gives external sequencing a transfer-occupancy interval, helping identify a retained load and coordinate upstream release with the availability of the handover point.

Transfer occupancy External timing M18 mounting
Select your currency