1. Measuring the speed of a driven roller
A machine can couple the encoder shaft to a driven roller and feed the TTL/RS-422 incremental channels to an external counter. The controller measures pulse frequency and converts it to roller speed using 8,192 pulses per revolution. Shaft loading, electrical output frequency and the documented speed-related temperature allowance define the operating assessment, while initialization time determines when signal acquisition can begin.
Problem Solved
Pulse-frequency feedback gives external drive logic a measured roller-speed reference, helping compare actual rotation with the commanded transport rate during operation.
Roller speed
TTL/RS-422
Incremental feedback
2. Tracking material length from a feed roller
A material feeder can couple the encoder to a roller whose effective circumference is known and count incremental rotation after an external reference event. The 8,192 pulses per revolution supply the scale for converting roller motion to feed length. Phase-shifted A and B channels let external counting logic account for reverse motion, with the actual roller contact and slip determining how well rotation represents material travel.
Problem Solved
Bidirectional pulse accumulation gives external feed control a relative travel value, helping coordinate material advance with the measured rotation of the coupled roller.
Relative feed length
A/B channels
External scaling
3. Aligning an index pulse to a machine reference
During commissioning, a machine can hold the shaft at its intended angular reference and assign that position to the encoder’s Z pulse through the 0-SET input. After the input has been open or at GND for at least 1,000 ms, applying supply voltage for longer than 250 ms performs the documented assignment. External sequencing then uses Z with A and B as its cyclic phase reference.
Problem Solved
A hardware-adjustable index position helps external sequencing align the recurring encoder reference with the machine’s chosen angular position without mechanically rotating the encoder body.
0-SET
Machine phase reference
Z pulse