1. Counting separated opaque cartons across a conveyor
A conveyor can place the sensor and P250 reflector on opposite sides of an opaque-carton path within the P250 sensing range. Each carton blocks the returned beam and changes the NPN state for an external counter. Sensitivity adjustment establishes the installed received-light condition, and commissioning checks full beam coverage, carton gaps and timing against the documented response and switching limits.
Problem Solved
Beam interruption supplies carton-passage events to external counting logic without requiring returned light from each carton surface, supporting counting across the defined conveyor path.
Carton counter
P250 supplied
1,000 Hz
2. Monitoring continuity of an opaque sheet feed
A sheet-feeding station can place the returned beam across the expected path of opaque material. A break or runout clears the beam, and the L/D control wire selects the switching behavior used by external feed logic. The installation uses the reflector-specific sensing range and verifies that the actual sheet fully interrupts the beam throughout normal movement.
Problem Solved
A sustained change in returned light provides external feed logic with a material-continuity reference, helping identify a break or runout along the monitored sheet path.
Sheet continuity
L/D control
Retro-reflective optics
3. Monitoring accumulation at a conveyor transfer
At a conveyor transfer, the sensor can monitor an opaque load crossing the beam to a reflector at the receiving position. External transfer logic evaluates signal duration to distinguish passing loads from sustained occupancy. The threaded M18 housing and fastening nuts position the axial beam, while the NPN output and control-wire switching selection connect the optical condition to the transfer sequence.
Problem Solved
A persistent blocked-beam condition helps external transfer logic recognize downstream occupancy and coordinate upstream release, using signal duration to distinguish accumulation from normal passage.
Transfer accumulation
M18 mounting
NPN signal