1. Counting separated metal tabs on a moving mechanism
A moving mechanism can guide separated metal tabs past the sensing face and send normally-open NPN transitions to an external counter. The 2,000 Hz switching rating informs the assessment of tab passage and gap timing. Commissioning sets the actual target gap within the applicable range, preserves non-flush installation clearances and accounts for the tab metal’s documented reduction factor.
Problem Solved
Successive metal-tab transitions give external counting logic discrete motion events, helping track repeated mechanical features without an optical mark or physical contact with the tabs.
Tab counter
2,000 Hz
NPN NO
2. Confirming a metal slide at an end position
A compact slide can present a metal flag to the non-flush sensing face at its intended end position. External sequencing logic reads the normally-open NPN state after the slide settles. M3 threaded mounting holes secure the sensor, while setup verifies flag material, seated gap and surrounding-metal clearances using the assured range and manufacturer installation diagram.
Problem Solved
A repeatable metal-flag reference helps external sequencing logic distinguish the intended slide position from travel between positions, using a compact contactless sensing arrangement.
Slide position
M3 mounting
Assured range
3. Checking a metal insert in a nonmetallic carrier
A nonmetallic carrier can hold a metal insert at a repeatable position in front of the inductive face. External inspection logic evaluates the NPN normally-open condition while the carrier is stationary. The fixture preserves non-flush clearances and uses representative inserts during setup, accounting for material-specific range reductions rather than treating all metals as equivalent sensing targets.
Problem Solved
A metal-specific presence condition helps external inspection logic identify an empty insert location in a nonmetallic carrier before the assembly continues to its next operation.
Insert inspection
Inductive sensing
Material factors