1. Combining emergency-stop and guard conditions in a machine cell
A machine cell can connect emergency-stop devices and guard signals through suitable Flexi Soft I/O modules and process their conditions in the CPU1 main module. Configured logic and application function blocks determine the system output commands. The required FX3-MPL0 plug holds the configuration, while engineering validates the complete sensor, logic, output and actuator chain for the cell’s required safety function.
Problem Solved
Central logic combines the connected protective-device conditions into defined output decisions, helping implement a consistent machine-cell stop and restart sequence through the modular safety system.
Emergency-stop logic
Modular I/O
Configuration storage
2. Using protective-field information from an EFI-enabled scanner
A machine station can connect a compatible EFI-enabled safety laser scanner to one of the controller’s two EFI interfaces. Process data and supported device information become available to configured control logic, while diagnostic information supports investigation of interrupted fields or device conditions. The implementation selects a documented device combination and validates the complete protective function using the scanner and controller configuration.
Problem Solved
EFI transfers supported scanner information into the controller’s logic and diagnostic environment, helping coordinate field-dependent machine decisions and identify the source of a protective-device interruption.
EFI scanner data
Device diagnostics
Configured logic
3. Exchanging safety conditions between adjacent production stations
Adjacent production stations can retain local Flexi Soft controllers and exchange selected process data or logic results over Flexi Link. Up to four compatible stations participate through EFI, with 26 bits per station on EFI1 or 52 bits on EFI1+2. CPU1 firmware and configuration software must meet the documented prerequisites, and commissioning validates the resulting cross-station safety dependencies.
Problem Solved
Shared process and logic information lets each configured station evaluate relevant conditions from its neighbors, helping coordinate a production-line safety function while retaining local controller logic.
Flexi Link
Station coordination
Safe data exchange