| Product type | Incremental rotary encoder |
| Pulses per revolution | 50; observe manufacturer maximum-revolution characteristic and output-frequency limit |
| Measuring step | 90° electrical / pulses per revolution |
| Measuring-step deviation | ±0.08° at non-binary number of lines |
| Error limits | ±0.05° |
| Electrical interface | HTL / push-pull |
| Signal channels | Six: A, A inverted, B, B inverted, Z, Z inverted |
| Initialization time | 30 ms |
| Output frequency | ≤600 kHz |
| Load current | ≤30 mA |
| Power consumption | ≤0.7 W without load |
| Power supply | 10–32 V for HTL operation, as shown in manufacturer signal-output diagram |
| Reference signal | One; 90° electrical, logically gated with A and B |
| Connection | Radial M23 twelve-pin male connector |
| M23 signal assignment | 1=B inverted; 3=Z; 4=Z inverted; 5=A; 6=A inverted; 8=B; 10=GND; 12=+Us; 2, 9 and 11 not connected |
| Screen connection | Screen connected to housing on encoder side and ground on control side |
| Reverse-polarity protection | Provided |
| Output short-circuit protection | Against another channel, Us or GND for maximum 30 s |
| Mechanical design | Solid shaft with flat; face-mount flange |
| Shaft size | Ø10 mm f7 ×19 mm; axial length 19 ±0.3 mm in drawing |
| Pilot diameter | Ø36 mm f8 |
| Flange mounting | Three M4 threads, 6 mm deep; 120° spacing on Ø48 ±0.05 mm pitch circle |
| Shaft material | Stainless steel |
| Flange material | Aluminum |
| Housing material | Aluminum die cast |
| Startup torque | 0.5 Ncm at +20 °C |
| Operating torque | 0.3 Ncm at +20 °C |
| Permissible shaft loading | 80 N radial; 40 N axial |
| Mechanical operating speed | ≤9,000 rpm; allow self-heating of 3.3 K per 1,000 rpm; usable speed also limited by pulse count and output frequency |
| Rotor moment of inertia | 6.2 gcm² |
| Bearing lifetime | 3.6 ×10¹⁰ revolutions |
| Angular acceleration | ≤500,000 rad/s² |
| IP rating | IP67 housing/connector side with mating connector fitted; IP65 shaft side, IEC 60529 |
| Operating temperature, stationary cable | −40 to +100 °C |
| Operating temperature, flexible cable | −30 to +100 °C |
| Storage temperature | −40 to +100 °C, without packaging |
| Relative humidity | 90%, condensation not permitted |
| Shock resistance | 70 g, 6 ms, EN 60068-2-27 |
| Vibration resistance | 30 g, 10–2,000 Hz, EN 60068-2-6 |
| EMC | EN 61000-6-2 and EN 61000-6-3 |
| MTTFD | 300 years to EN ISO 13849-1; nominal component load, average ambient 40 °C, 8,760 h/year; standard product, not a safety component |
| Hardware 0-SET | Provided on M23 pin 7; H-active; LOW=0–3 V, HIGH=4 V to Us |
| 0-SET timing | Apply Us for >250 ms after the input has been open or at GND for at least 1,000 ms; assigns Z to current shaft position |
| Physical Weight (kg) | 0.3 |