1. Counting separated loads across a wide transport path
A transport line can place the sender and receiver on opposite sides of the expected load path and feed relay transitions to an external counter as opaque loads interrupt the beam. The 0–50 m sensing range accommodates the optical separation, while the receiver potentiometer adapts sensitivity. Load spacing and counter sampling use the documented 33 Hz switching and response no greater than 15 ms.
Problem Solved
Direct beam interruptions provide external counting logic with separated load-passage events, helping track transport flow without relying on reflected light from each load surface.
Wide-path count
Through-beam
Isolated relay
2. Monitoring continuity of an opaque material web
A web-handling machine can place the direct beam across an expected opaque strip so a break or run-out clears the optical path. The receiver’s light-switching relay changes with beam reception, and external machine logic interprets a persistent clear condition as missing material. Sensitivity adjustment and received-light indication assist setup with the actual web geometry and its coverage of the beam.
Problem Solved
A persistent change in direct beam reception gives external web logic a continuity reference, helping identify missing opaque material before the next process step continues.
Material continuity
Light switching
Received-light indication
3. Identifying a retained load at a transfer station
A conveyor handover can route the direct beam across its occupied position and time the relay condition in external sequencing. A load that remains in the path keeps the beam interrupted beyond the expected passage interval, allowing the controller to hold upstream release. Electrically isolated change-over contacts provide the interface, with the actual circuit staying within the documented contact and response ratings.
Problem Solved
A sustained beam interruption gives external sequencing a transfer-occupancy interval, helping distinguish a passing load from one retained at the handover position.
Retained load
External timing
Change-over contacts