SICK 1036770 DFS60B-BGPA10000 Programmable TTL/HTL Encoder

USD 720.20

10,000-pulse incremental encoder with programmable TTL/HTL, factory TTL level, 14 mm blind hollow shaft, configurable index and radial M23 connection.

SKU SICK-1036770 Category
SICK Encoders

SICK DFS60B-BGPA10000 Programmable TTL/HTL Encoder

BrandSICK
Model IdentifierDFS60B-BGPA10000
Official Part Number1036770

Technical Overview

The SICK DFS60B-BGPA10000 is a 10,000-pulse incremental encoder with a 14 mm blind hollow shaft and radial M23 twelve-pin male connector. Six TTL/HTL channels provide A, B and index Z together with their inverted counterparts, with factory output level TTL. Electrical index widths and a 1–359° mechanical zero-pulse width can be configured for the external receiver. The 4.5–32 V device has a 600 kHz output-frequency limit, so usable speed depends on pulse count alongside mechanical and thermal limits. A stainless steel shaft, aluminum flange and die-cast aluminum housing provide rotary integration, with IP65 at the shaft and IP67 on the housing/connector side when mated.

10,000 PPR programmable TTL/HTL incremental encoder with factory TTL output, 14 mm blind hollow shaft and radial M23 twelve-pin male connector.

Key Features

  • 10,000 pulses per revolution; pulse-count-dependent usable speed
  • Six TTL/HTL channels; factory output level TTL
  • A, B and Z signals with inverted counterparts
  • Configurable electrical index gating and 1–359° mechanical index width
  • 14 mm F7 blind hollow bore; customer mating shaft j7; 15–42 mm engagement
  • Radial M23 twelve-pin male connector; 4.5–32 V supply
  • ≤600 kHz output frequency; ≤30 mA load current; ≤0.7 W without load
  • Stainless steel shaft, aluminum flange and die-cast aluminum housing
  • ≤6,000 rpm mechanical limit; allow 3.3 K self-heating per 1,000 rpm
  • IP67 housing/connector side when mated; IP65 shaft; cable-dependent operating-temperature limits

Mount directly onto a 14 mm shaft and configure TTL/HTL signal levels and index width for external incremental motion and cycle-reference inputs.

Technical Specification Matrix

ParameterValue
Product typeIncremental rotary encoder
Pulses per revolution10,000; usable speed depends on pulse count and output-frequency limit
Measuring step90 electrical degrees / pulses per revolution
Measuring-step deviation±0.01° at non-binary number of lines
Error limits±0.05°
Signal interfaceSix-channel TTL/HTL; programmable; factory output level TTL
Signal channelsA, B, Z and their inverted counterparts
Reference signalOne; 90 electrical degrees, logically gated with A and B
Electrical zero-pulse widths90° gated with A and B; 180° gated with B or A; 270° gated with A or B
Mechanical zero-pulse widthProgrammable 1–359° of one mechanical shaft revolution
Initialization time32 ms; 30 ms with mechanical zero-pulse width
Output frequency≤600 kHz
Load current≤30 mA
Power consumption≤0.7 W without load
Power supply4.5–32 V
ConnectionRadial M23 twelve-pin male connector
Pin assignmentM23: 1=B inverted; 3=Z; 4=Z inverted; 5=A; 6=A inverted; 8=B; 10=GND; 12=Us; 2, 9 and 11=not assigned
Cable screenScreen connected to housing at encoder side; connected to ground at control side
Reverse-polarity protectionProvided
Output short-circuit protectionTTL at ≥5.5 V: other channel or GND, maximum 30 s; HTL or TTL at <5.5 V: other channel, Us or GND, maximum 30 s
Mechanical designBlind hollow shaft
Shaft diameter14 mm; F7 bore tolerance; mating customer shaft j7
Shaft engagementMinimum 15 mm; maximum 42 mm
Shaft materialStainless steel
Flange materialAluminum
Housing materialAluminum die cast
Start-up torque0.8 Ncm at +20 °C
Operating torque0.6 Ncm at +20 °C
Permissible static movement±0.3 mm radial; ±0.5 mm axial
Permissible dynamic movement±0.1 mm radial; ±0.2 mm axial
Operating speed≤6,000 rpm mechanical limit; also respect selected pulse count, ≤600 kHz output-frequency limit and manufacturer speed curve
Self-heatingAllow 3.3 K per 1,000 rpm when designing operating temperature range
Rotor moment of inertia40 gcm²
Bearing lifetime3.6 ×10^10 revolutions
Angular acceleration≤500,000 rad/s²
IP ratingIP67 housing/connector side with mating connector fitted; IP65 shaft side, IEC 60529
Operating temperature−40 to +100 °C with stationary cable; −30 to +100 °C with flexible cable; account for speed-related self-heating
Storage temperature−40 to +100 °C without package
Relative humidity90%; condensation not permitted
Shock resistance70 g, 6 ms; EN 60068-2-27
Vibration resistance30 g, 10–2,000 Hz; EN 60068-2-6
EMCEN 61000-6-2 and EN 61000-6-3
MTTFD300 years, EN ISO 13849-1; standard product, not a safety component; calculation at nominal component load, average ambient +40 °C and 8,760 h/year, with all electronic failures considered hazardous
Listed programming toolsPGT-08-S 1036616; PGT-10-Pro 1072254; separate accessories
Physical Weight (kg)0.2

Industrial Applications

1. Measuring feed travel from a directly mounted shaft

A machine feed shaft can pass into the 14 mm blind hollow bore so its rotation produces incremental A and B signals for an external counter. The controller converts accumulated counts into relative travel using the known shaft-to-feed relationship. Setup establishes the initial reference and actual decoding mode, while usable motion speed respects the selected pulse count, 600 kHz output limit, mechanical speed limit and self-heating.

Problem Solved

Direct shaft rotation supplies incremental movement counts to external feed control, helping track relative travel through the machine’s established mechanical transmission and reference procedure.

Relative feed travel 14 mm blind bore Incremental counting

2. Monitoring shaft speed and direction

A rotating machine shaft can feed its A and B quadrature channels to an external motion controller that evaluates pulse rate and phase order. The six-channel TTL/HTL interface includes inverted counterparts, and the factory output level is TTL. Commissioning matches the configured signal level to the receiver and checks frequency, shaft movement, bearing loading conditions and thermal margin throughout the required speed range.

Problem Solved

Pulse rate and quadrature phase provide an external controller with speed and direction references, helping monitor rotating equipment using incremental feedback from the coupled shaft.

Speed feedback Direction reference TTL/HTL

3. Matching an index pulse to a rotary machine cycle

A rotary indexing machine can route Z and its inverted counterpart to an external cycle-reference input alongside A and B. The electrical index width can be configured to the documented gating options, or a mechanical width from 1–359° can be selected. The controller uses the resulting reference pulse within its homing and cycle logic, with initialization timing and receiver requirements included in the setup.

Problem Solved

A configured index width gives external rotary sequencing a reference signal suited to its receiving logic, helping coordinate cycle recognition alongside incremental shaft movement.

Rotary cycle Configurable index Z reference
Select your currency