SICK 6013331 VTE18-3F4715 PNP Infrared Diffuse Sensor

USD 92.56

VTE18-3F4715 provides 5–350 mm reference-white sensing, infrared LED light, PNP light switching, 5 m PVC cable and IP67 protection.

SKU SICK-6013331 Category
SICK V18

SICK VTE18-3F4715 PNP Infrared Diffuse Sensor

BrandSICK
Model IdentifierVTE18-3F4715
Official Part Number6013331

Technical Overview

The SICK VTE18-3F4715 is an M18 × 1 cylindrical photoelectric proximity sensor with energetic infrared LED sensing and an axial optical axis. Its 5–350 mm sensing range and 5–400 mm maximum range apply to 90% remission reference white; lower-remission black targets have a shorter documented range. A 270° potentiometer adjusts sensing range, while the single PNP output uses fixed light switching. Response is no more than 2 ms with a resistive load, and switching frequency is 250 Hz at a 1:1 light/dark ratio. The pBT/PC plastic housing, PMMA optics, IP67 protection and 5 m PVC cable support machine integration.

M18 axial infrared LED sensor with 5–350 mm reference-white sensing, a single PNP output, 5 m PVC cable and IP67 protection.

Key Features

  • Energetic photoelectric proximity sensing; axial optical axis
  • 5–350 mm sensing; 5–400 mm maximum on 90% reference white
  • Infrared LED; Ø20 mm spot at 400 mm
  • 270° sensing-range potentiometer
  • Single PNP output; fixed light switching
  • ≤2 ms resistive-load response; 250 Hz at 1:1 light/dark ratio
  • 10–30 V DC; 30 mA without load; output current ≤100 mA
  • 5 m three-wire PVC cable; 0.14 mm² conductors
  • M18 × 1 pBT/PC plastic housing; PMMA optics
  • IP67; −25 to +70 °C operation

Set a reflected-light detection condition from one mounting side and send a PNP signal to external counting or sequencing logic.

Technical Specification Matrix

ParameterValue
Functional principleEnergetic photoelectric proximity sensing
Optical axisAxial
Housing designCylindrical; M18 × 1
Housing length63.6 mm
Sensing range5–350 mm on 90% remission reference white, DIN 5033
Maximum sensing range5–400 mm on 90% remission reference white, DIN 5033
Black-target sensing range5–170 mm on 6% remission black
Black-target maximum range5–200 mm on 6% remission black
Light sourceInfrared LED
Light spot sizeØ20 mm at 400 mm
Average LED service life100,000 h at +25 °C
Adjustment270° potentiometer for sensing range
Switching outputSingle PNP output
Switching modeFixed light switching
Response time≤2 ms; signal transit time with resistive load
Switching frequency250 Hz at a 1:1 light/dark ratio
Power supply10–30 V DC; limit values
Ripple±10%; remain within supply-voltage tolerances
Current consumption30 mA without load
Output current≤100 mA
Connection5 m three-wire PVC cable
Conductor cross-section0.14 mm²
Cable diameterØ3.1 mm
Cable handlingDo not bend below 0 °C
Connection diagramCD-043: BN=L+; BU=M; BK=Q
Circuit protectionA: supply reverse polarity; B: inputs/output reverse polarity; C: interference suppression; D: output overcurrent and short circuit
Protection classIII
Housing materialPBT/PC plastic
Optics materialPMMA plastic
IP ratingIP67
Operating temperature−25 to +70 °C
IndicationYellow signal-strength LED
Fastening nut geometryPlastic, 22 mm across flats as shown in the manufacturer drawing
UL fileNMFT2.E175606
FocusApproximately 2.8°
Angle of dispersionApproximately 2.8°
Physical Weight (kg)0.1

Industrial Applications

1. Counting separated products at a transfer point

A transfer conveyor can present separated products to the axial optical axis and send PNP switching transitions to an external counter. The 270° potentiometer sets the reflected-light sensing condition for the representative product. Commissioning establishes actual surface response and spacing using the reference-target ranges, ≤2 ms resistive-load response and 250 Hz rating together with receiver timing.

Problem Solved

Product transitions provide external counting logic with arrival events, helping track transferred units when the installed optical presentation and product spacing create distinct switching states.

Product counting PNP signal 250 Hz

2. Checking a component in a carrier pocket

An assembly fixture can position a carrier pocket at a repeatable inspection location and present the intended component to the axial optical axis. External inspection logic samples the configured PNP condition after the carrier settles. Reflected-light adjustment establishes the response to the intended component surface. Setup evaluates the pocket background and actual target remission.

Problem Solved

A component-reflection condition gives external inspection logic a presence reference at the presented pocket, helping identify an empty position before the next assembly operation.

Carrier inspection Component presence Infrared LED

3. Monitoring sheet continuity over a supported path

A sheet-handling machine can aim the axial sensor at a supported material surface and monitor its PNP state through external process logic. A break or missing sheet changes the returned-light condition at that fixed location. The installed gap and sensitivity are established using the 270° potentiometer, with trials covering actual sheet remission and the exposed background when material is absent.

Problem Solved

A maintained sheet-reflection condition lets external process logic recognize a loss of material at the monitored location, supporting continuity monitoring along a defined supported path.

Sheet continuity Fixed sensing location PNP output
Select your currency