SICK 1044861 IME12-08NPSZW6K PNP Inductive Proximity Sensor

USD 49.14

IME12-08NPSZW6K offers 8 mm nominal inductive sensing, PNP normally-open output, 2,000 Hz switching, non-flush M12 mounting and a 10 m PVC cable.

SKU SICK-1044861 Category
SICK IME

SICK IME12-08NPSZW6K PNP Inductive Proximity Sensor

BrandSICK
Model IdentifierIME12-08NPSZW6K
Official Part Number1044861

Technical Overview

The SICK IME12-08NPSZW6K is a short-body M12 × 1 inductive proximity sensor for non-flush installation. It has an 8 mm nominal sensing range and 6.48 mm assured range, with reference reduction factors for different target metals. Its PNP normally-open output provides 2,000 Hz switching through a 10 m three-wire PVC cable with 0.25 mm² conductors. The 10–30 V DC device uses a nickel-plated brass housing and PA66 sensing face, with IP67 protection and operation from −25 to +75 °C. Short-circuit and power-up pulse protection are provided. Housing length is 44 mm and thread length is 24 mm, and two nickel-plated brass mounting nuts are supplied.

Non-flush M12 inductive sensor with 8 mm nominal range, PNP normally-open output, 2,000 Hz switching and a 10 m three-wire PVC cable.

Key Features

  • Short-body M12 × 1 inductive sensor; non-flush installation
  • 8 mm nominal sensing range; 6.48 mm assured sensing range
  • PNP normally-open output; DC three-wire wiring
  • 2,000 Hz switching frequency
  • 10 m three-wire PVC cable; 0.25 mm² conductors
  • 10–30 V DC; continuous output current ≤200 mA
  • Short-circuit and power-up pulse protection
  • Nickel-plated brass housing and PA66 sensing face
  • Two nickel-plated brass mounting nuts; 17 mm across flats
  • IP67; −25 to +75 °C operation

Use a non-contact PNP switching event from the M12 sensing face to reference metal-part position or repeated feature passage in external control logic.

Technical Specification Matrix

ParameterValue
Functional principleInductive proximity sensing
Housing designShort-body
Mounting threadM12 × 1
Housing diameterØ12 mm
InstallationNon-flush
Nominal sensing range Sn8 mm
Assured sensing range Sa6.48 mm
Switching outputPNP normally open
Electrical wiringDC three-wire
Switching frequency2,000 Hz
Connection10 m three-wire PVC cable
Power supply10–30 V DC
Ripple≤10%
Voltage drop≤2 V at maximum Ia
Availability delay≤100 ms
Hysteresis5–15%
Reproducibility≤2% of Sr at supply voltage UB and constant ambient temperature Ta
Temperature drift±10% of Sr
Continuous output current≤200 mA
No-load current≤10 mA
Circuit protectionShort-circuit protection; power-up pulse protection
Housing materialNickel-plated brass
Sensing face materialPA66 plastic
Housing length44 mm
Thread length24 mm
Maximum tightening torque≤12 Nm
Items suppliedTwo nickel-plated brass mounting nuts; 17 mm across flats
Material reduction factorsReference values, may vary: St37 steel 1; stainless V2A/304 approximately 0.8; aluminum approximately 0.45; copper approximately 0.4; brass approximately 0.4
Installation diagram clearancesA=12 mm; B=24 mm; C=12 mm; D=24 mm; E=16 mm; F=64 mm; letters refer to manufacturer non-flush installation diagram
IndicationDisplay LED
IP ratingIP67 according to EN 60529
Operating temperature−25 to +75 °C
Shock and vibration resistance30 g, 11 ms; 10–55 Hz, 1 mm
EMCEN 60947-5-2
UL fileNRKH.E181493
MTTFD1,735 years
DCavg0%
Cable materialPVC
Cable length10 m
Conductor cross-section0.25 mm²
Cable diameterØ3.9 mm
Conductor functionsCD-001: BN=L+; BK=NO; BU=M

Industrial Applications

1. Confirming a seated metal component in an assembly fixture

An assembly fixture can present a seated metal component to the non-flush sensing face and read the PNP normally-open state after the part settles. The M12 threaded housing and three-wire cable support installation at the reference point. Setup considers the 6.48 mm assured range, the actual target metal and the documented clearance diagram when positioning the sensor.

Problem Solved

A seated-target reference helps external inspection logic distinguish a presented metal component from an empty fixture location, supporting the next step of the assembly sequence.

Assembly presence Non-flush M12 PNP output

2. Counting separated metal tabs on a moving guide

A moving guide can carry separated metal tabs across the sensing face and deliver PNP transitions to an external counter. The 2,000 Hz switching rating supports repeated events when tab width, spacing, gap and transit speed provide distinct output intervals. Target-material reduction factors and the non-flush installation clearances guide setup for the actual moving hardware.

Problem Solved

Inductive transitions provide external counting logic with tab-passage events, helping track repeated metal features without mechanical contact between the sensing face and the moving guide.

Tab counting 2,000 Hz Inductive transitions

3. Recording repeated actuator arrivals with a metal flag

A machine actuator can bring a metal flag to a fixed end-position reference on each cycle. The PNP output supplies the arrival state to external timing logic, which records the interval between commanded motion and detected arrival. The 44 mm housing length supports mechanical planning, while the documented reproducibility conditions inform evaluation of the installed target gap.

Problem Solved

Repeated flag detection gives external timing logic a consistent position event for comparing actuator cycles, helping identify changes in arrival timing within the machine sequence.

Cycle timing Metal flag PNP position event
Select your currency