SICK 7900602 MZK1-02VPS-AU0 PNP Magnetic Cylinder Sensor

USD 156.78

MZK1-02VPS-AU0 detects piston position on dovetail-groove cylinders, with PNP normally-open output, 5,000 Hz switching, 2 m PUR cable and IP67 protection.

SKU SICK-7900602 Category
SICK MZK1

SICK MZK1-02VPS-AU0 PNP Magnetic Cylinder Sensor

BrandSICK
Model IdentifierMZK1-02VPS-AU0
Official Part Number7900602

Technical Overview

The SICK MZK1-02VPS-AU0 is a magnetic cylinder sensor for dovetail-groove cylinders, with a front sensing face and 26 mm aluminum housing. Its PNP normally-open DC three-wire output provides a 5,000 Hz switching rating and continuous current up to 200 mA. Typical response sensitivity is 2 mT, and reproducibility is no more than 0.1 mm with constant supply voltage and ambient temperature. The sensor operates from 10–30 V DC through a 2 m three-wire PUR cable, consuming 10 mA without load. Reverse-polarity, short-circuit and power-up pulse protection are provided, alongside an LED indicator. The plastic sensing face and aluminum housing provide IP67 protection, with operation from −25 to +75 °C.

Dovetail-groove magnetic cylinder sensor with PNP normally-open output, typical 2 mT sensitivity, 5,000 Hz switching and 2 m PUR cable.

Key Features

  • Magnetic piston-position sensing for dovetail-groove cylinders
  • Front sensing face; 26 mm aluminum housing
  • PNP normally-open DC three-wire output
  • 5,000 Hz switching frequency; continuous output current ≤200 mA
  • Typical response sensitivity 2 mT
  • Reproducibility ≤0.1 mm at constant supply voltage and ambient temperature
  • 10–30 V DC; 10 mA consumption without load; availability delay ≤30 ms
  • 2 m three-wire PUR cable; 0.25 mm² conductors; local LED indicator
  • Reverse-polarity, short-circuit and power-up pulse protection
  • Plastic sensing face; IP67 to EN 60529; −25 to +75 °C operation

Read a piston-position switching event from a dovetail-groove cylinder through a protected PNP output, with an LED for local indication.

Technical Specification Matrix

ParameterValue
Sensor typeMagnetic cylinder sensor
Cylinder typeDovetail-groove cylinder
Sensing faceFront
Housing length26 mm
Switching outputPNP normally open; DC three-wire
Switching frequency5,000 Hz
Typical response sensitivity2 mT
Reproducibility≤0.1 mm at constant supply voltage and ambient temperature
Power supply10–30 V DC
Current consumption10 mA without load
Voltage drop≤2.2 V at maximum output current
Continuous output current≤200 mA
Time delay before availability≤30 ms
ProtectionReverse-polarity, short-circuit and power-up pulse protection
IndicationLED indicator
Teach-inNo
Connection2 m three-wire PUR cable
Wire assignmentCD-001: BN=L+; BK=NO; BU=M
Housing materialAluminum metal
Sensing-face materialPlastic
IP ratingIP67 to EN 60529
Operating temperature−25 to +75 °C
Shock resistance30 g, 11 ms
Vibration resistance10–55 Hz, 1 mm
EMCEN 60947-5-2
MTTFD1,943 years
DCavg0%
Mission time20 years
Conductor cross-section0.25 mm²

Industrial Applications

1. Confirming a pneumatic actuator at its working position

A pneumatic station can mount the sensor on a compatible dovetail-groove cylinder so the piston magnet passes the front sensing face at the required working position. External sequencing logic reads the PNP normally-open signal before requesting the next process step. Commissioning establishes the switching location with the actual cylinder magnet and checks the local LED alongside the controller input.

Problem Solved

A piston-position event gives external sequencing logic a working-position condition, helping coordinate the next machine operation after the actuator reaches the monitored location.

Piston position Dovetail groove PNP sequence input

2. Counting repeated cylinder strokes

A cycling actuator can pass its piston magnet through the fixed sensing position once per monitored stroke. The 5,000 Hz switching rating supports distinct output transitions within the sensor limit, and an external counter records those events. Setup checks the actual magnetic target, stroke trajectory and controller input timing so each passage produces one intended count.

Problem Solved

Repeated piston passages provide external counting logic with stroke events, helping track actuator usage or production cycles from a fixed non-contact sensing point on the cylinder.

Stroke counting 5,000 Hz Magnetic passage

3. Measuring dwell at a cylinder position

A cylinder-driven fixture can hold its piston near the selected sensing point during a process dwell. External machine logic times the PNP normally-open state to compare actual position occupancy with the required sequence interval. Setup establishes a stable switching location using the actual piston magnet and considers the documented reproducibility under constant supply voltage and ambient temperature.

Problem Solved

The position signal gives external timing logic a dwell reference, helping distinguish a brief piston passage from a maintained actuator position during a timed machine operation.

Position dwell External timer Repeatability
Select your currency